您要查找的是不是：
- centralised control signaling 集中控制信号方式
- The response of a terminal to remote control signals. 终端对远程控制信号的响应。参阅handshaking。
- The other host of signal are control signals. 另一组信号是控制信号。
- Including load states on tracks this allows for the study of dynamical, load-adaptive strategies for centralised control systems. 因为集聚控制系统，包括在轨道上的负荷州这考虑到动态又负荷- 适合的策略研究。
- Expands the control signal for parallel steam generators. 使用并联的蒸汽炉时可用此配件扩大控制讯号。
- A control signal. 一个控制信号。
- This paper states the application of programmable logic controller (PLC) to the centralised control system of belt conveyor. 主要论述了可编程序控制器(PLC)在胶带输送机集中控制系统中的具体应用；
- Injector #2 output driver does not respond properly to the control signal. 喷嘴%232输出驱动器未对控制讯号作出正炒应。
- Design Of Programme - controlled Signal. 程控信号发生器的设计。
- Injector #output driver does not respond properly to the control signal. 喷油器%237输出驱动器没有正确地响应控制信号。
- For checking the evaluation device a control signal can be generated. 通过产生一个控制信号来检查核定设备。
- The main control cell adopt LPC936 singlechip, which offers the control signal. 其主控制单元采用LPC936单片机，提供控制信号。
- UE transmits the uplink shared control signaling channel with the reported or determined transmission power. 终端以确定的传输功率在上行共享控制信令传输信息。
- Table 3-25 is a truth table of the 8251 bus control signals. 表3-25是8251总线控制信号的真值表。
- A logic element designed to act as either an adder or a subtracter in accordance with the control signal applied to it. 根据供给它的控制信号,或起加法器作用或起减法器作用的一种逻辑元件。
- It carries the micro-processor control signal or "interface signals". 它用以传递微处理机的控制信号（或称“接口信号”）。
- A New Method Of Self-Learning and Revivification of Infrared Remote control Signal Based On Single Chip Microcomputer. 基于单片机的红外遥控信号自学习及还原新方法。
- Using this information from the oxygen sensor and other inputs, the ECM generates a control signal to the carburetor. 根据氧传感器传递过来的信息及其它输入信号，ECM向化油器发出控制信号。
- In order to gate out the required control signals, pins have to be multiplexed. 为了给出所需要的控制信号，管腿必须采用多路转换。
- Call Accepted Signal A control signal transmitted by the called equipment to indicate that it accepts an incoming call. 呼叫接受的信号被叫设备发出的控制信号,表明正在接收入局呼叫。
