您要查找的是不是：
- Immediate quenching and tempering process of steel T10 after low temperature salt bath chromizing was studied. 研究了 T10钢在低温盐浴渗铬后直接淬火并回火工艺。
- The relevant suggestion was put forward to strictly control the tempering process and ensure the temperature and heat preservation time exact. 建议加强回火工艺的控制,确保加热温度和时间的准确性。
- The upper stage mixing shaft, the cut reamer big shaft, the up-down body etc. are all passed the aging, quenching and tempering process. 上级搅拌轴、绞龙大轴以及机身上下体等，均经时效、调质、淬火处理；
- They put forward the optimum tempering process for non-cabide bainite abrasion resisting steel, in addition,introduced the applied effect of ... 提出了适合无碳化物贝氏体耐磨钢的最佳回火工艺,并介绍了无碳化物贝氏体钢的工况及应用结果。
- The Optimum Process of Spray-Coated Chemical Tempering 玻璃的喷涂法化学钢化最佳工艺制度的选择
- Compared with conventional quenching and tempering process,the effect of austempering on the microstructure and properties of high chromium white cast iron was studied. 对球铁凸轮轴的等温淬火工艺进行了分析,认为产生淬火裂纹的主要原因是:加热炉内的温度过高及等温槽内盐浴老化、等温淬火温度偏低。
- After chemical tempered, it can be cut, coated, sandwiched glue etc. 化学钢化后可切割、镀膜、夹胶等再加工。
- For2Cr13 valve sealing face by double glow plasma W alloying process,carburizing , quenching and tempering process, the results show its machining size is little, its hardness is high and its static pressure lifetime is long. 结果表明经双层辉光离子渗钨、渗碳和淬火回火处理的2Cr13阀门密封面加工量小、硬度高、静压寿命长。
- The differences in tempering process between small thin and thick pieces of glass have been pointed out , technical index of heating furnace and wind grating have also been introduced . 说明了小片薄玻璃在钢化生产过程中与厚玻璃钢化的不同,简要介绍了加热炉和风栅等设备的技术指标。
- On the basis of the numerical simulation of quenching process,this paper further gives a numerical calculation model of tempering process,emphatically take the stress relaxation into account. 在淬火过程数值模拟基础上,进一步提出了回火过程的数值计算模型,其中着重考虑了应力松弛现象。
- Through studying the microstructure and performance of ULCB steel under different tempering processes, the temper characteristics of such steel can be obtained. 摘要通过对低碳贝氏体钢不同回火工艺下金相组织与性能的研究，了解该类型钢的回火特性。
- The cryogenic treatment could improve the bending strength more obviously when it was performed between two tempering processes than after quenching or preprocessing. 深冷处理安排在两次回火之间进行,对抗弯强度的提高比较明显;安排在淬火后或预处理后进行,对抗弯强度的影响不明显。
- The two elements are synthesized by a chemical process. 这两种元素已经化学合成。
- The practice shows that it is reliable,convenient and efficient when used in heat treatment process,especially in quenched and tempered process. 实践证明，将之应用于热处理生产过程，特别是淬回火过程时，不仅安全、可靠，而且灵活、高效。
- A reactor is a container for chemical reaction. 反应器是进行化学反应的容器。
- The chemical symbol for copper is "Cu". 铜的化学符号是Cu。
- We are doing a chemical experiment. 我们正在做化学实验。
- My major is the subject of chemical engineering. 我的专业是化学工程学。
- Effect of deformation on the temper process of lath martensite 形变对板条马氏体回火组织的影响
- Ammonia is a chemical substance. 氨是种化学物质。
