您要查找的是不是：
- Chlorinated Polyethylene (CPE) has many good properties as a novel elastomer. 氯化聚乙烯（CPE）是一种新型的高分子弹性体材料，具备许多优异的性能。
- Chlorinated polyethylene (CPE) grafting styrene copolymer (CPE-g-St) was synthesized in aqueous suspension system. 采用水相悬浮法合成了氯化聚乙烯(CPE)接枝苯乙烯(St)共聚物(CPE-g-St)。
- Finally, the effect of chain structure and solid state of chlorinated polyethylene on chlorosulfonation was discussed. 还讨论了氯化聚乙烯的链结构和固态结构对氯磺化反应的影响。
- Chlorinated polyethylene(CPE) as impact modifiers has less effect on RPVC fusion time. 氯化聚乙烯(CPE)作为抗冲击改性剂对RPVC的塑化促进作用较小;
- TAIC is widely used as a coagent for peroxide crosslinking or radiation crosslinking of Chlorinated Polyethylene (CPE) EPDM Fluroelaster and so on. TAIC作为过氧化物交联或自由基反应交联的助交联剂被广泛应用，如氯化聚乙烯（CPE)，EPDM，氟橡胶等等。
- The reaction between polystyrene having oxazoline groups(RPS) and chlorinated polyethylene(CPE) was investigated by FTIR, DSC methods. 用FTIR、DSC等方法研究了含?f唑啉官能团的聚苯乙烯(RPS)与氯化聚乙烯(CPE)之间的反应。
- The recipe optimization of thiourea curing system for chlorinated polyethylene(CPE) was conducted by homogeneous design and regression analysis. 应用均匀设计法和回归分析进行了氯化聚乙烯(CPE)的硫脲硫化体系配方优化研究。
- The water swelling rubber like plastic material(WSM) was prepared by blending chlorinated polyethylene(CPE) with sodium acrylate(AANa). 由丙烯酸钠 (AANa)与氯化聚乙烯 (CPE)制备吸水膨胀性橡塑材料 (WSM)。
- The miscibility between chlorinated polyethylene(CPE) with ethylene pro pylene diene monomer/nylon resin(EPDM/PA) was studied. 研究了氯化聚乙烯(CPE)对三元乙丙橡胶/尼龙(EPDM/PA)共混体系的增容机理。
- Some Opinions and improvement proposals on current chlorinated polyethylene industry standard have been put forward through examination practice. 通过检测实践,提出对现行氯化聚乙烯行业标准的一些看法和改进建议。
- The effect of several kinds of antioxidant on heat resistance properties of chlorinated polyethylene (CPE) was investigated. 摘要研究了几种防老剂对几种氯化聚乙烯(CPE)胶料耐热性能的影响。
- The application of chlorinated polyethylene rubber(CM) in wires and cables,rubber tubes,rubber belts and waterproofing roll-roofing were reviewed. 综述了氯化聚乙烯橡胶(CM)在电线电缆、胶管、胶带、防水卷材中的应用现状。
- Mechanical performance and film-coating performance of the mechanochemical copolymer of methyl methacrylate on chlorinated polyethylene were studied. 主要研究了甲基丙烯酸甲酯(PMMA)与氯化聚乙烯(CPE)力化学共聚物的力学性能和涂膜性能。
- Thermoplastic polyurethane elastomer(TPU) with chlorinated polyethylene (CPE) and CPE/HPVC (high molecular weight PVC) as modifiers was studied systematically by melt blending. 以CPE和CPE/HPVC为改性剂,用熔融共混的方式对TPU的共混体系进行了系统的研究。
- Acrylate (MeAA) was in situ prepared in chlorinated polyethylene (CPE) matrix through neutralization of hydroxide (oxide) and acrylic acid (AA) during mixing. 通过金属氢氧化物(氧化物)和丙烯酸(AA)的中和反应,在氯化聚乙烯(CPE)中原位合成丙烯酸盐(MeAA)。
- The mechanochemical degrade of chlorinated polyethylene(CPE) has been studied and the mechanism have been discussed preliminarily.The IR proves its existence. 研究了氯化聚乙烯(CPE)的力化学降解,红外光谱的结果证明了力化学降解的存在。
- Based on the drying characteristics of the chlorinated polyethylene(CPE),this paper presents an intermittent operating pneumatic-fluidized bed combined drying system. 根据氯化聚乙烯的干燥特性,开发了一种新型间歇式气流流化床组合干燥工艺,产品质量好,环保效果好。
- The preparation of higher chlorinated polyethylene(HCPE) for coatings in solid phase and its application in corrosion protective coatings has been described. 研究了固相法涂料用高氯化聚乙烯树脂的制备及其在防腐涂料中的应用。
- The thermal behavior of chlorinated polyethylene (CPE) modified bitumen（PMB-CPE）samples were characterized by four components analytical method, TGA and DSC thermal analysis. 摘要 文章应用四组分分析法、热重分析法（TGA）和示差量热扫描法（DSC）对氯化聚乙烯改性沥青PMB-CPE的热性能进行了研究。
- MCS resin was prepared from the copolymexization of methyl methacrylate (MMA) and styrene (S) with chlorinated polyethylene (CPE) by the method of suspension-swelling graft copolymerization. 将甲基丙烯酸甲酯(MMA)、苯乙烯(S)在氯化聚乙烯(CPE)存在下进行悬浮接枝共聚,获得MCS树脂。
