您要查找的是不是：
- choke flange joint 扼流法兰连接
- Joint type of this valve is flange joint. 本阀连接方式为法兰连接。
- Press bending joint, flange joint and air spring end plate. 扣压弯曲接头，法兰接头和空气弹簧接头。
- The flange joint is a common connection form of high-rising steel tower structure, and bolt looseness of flange is the damage with facilitated occurrence in the structure. 摘要法兰连接是输电线塔等高耸钢结构中常用的一种连接方式，法兰处螺栓的松动是结构容易发生的损伤。
- And a gasket, matching the elastomeric valve seals, is installed in the bottom flange joint, regardless of attached valve type, in order to seal external fluid from the housing interior. 为了密封外壳，使得流体不会从外壳内泄露出来，需要一个与阀门弹性密封相配的垫圈，安装在底部法兰连接件里，而无论所连接的阀门是什么类型。
- height of protrusion in flange joint 法兰连接凸出部分高度
- Used in flange joint of heat exchanger 系换热器法兰联接用垫片
- Used in flange joint of normal pipe vessel 系一般管法兰和容器法兰联接用垫片
- Through adjusting gasket structure, its mechanical performance is changed to consist with request of bolt, so that flange joints can meet the standard of sealing request. 通过垫片工艺结构的调整,使其力学性能与紧固件的要求一致,使法兰接头符合操作时的密封性。
- flange joint surface of outer easing 汽缸中分面
- The fish bone in her throat made her choke. 她喉咙中的鱼骨使她哽噎。
- I managed to choke back my tears. 我设法止住泪水。
- FLANGED:There are several steps to follow to make sure that a flanged joint will be properly assembled. 法兰连接:为了确保正确进行阀兰连接安装,需要遵循如下几个步骤。
- She kept talking and nobody could choke her off. 她说个不停,没人能阻止她。
- There are several steps to follow to make sure that a flanged joint will be properly assembled. 为了确保正确进行阀兰连接安装,需要遵循如下几个步骤。
- The girl talked endlessly and her mother had to choke her off. 女孩讲个没完，她的母亲不得不加以阻止。
- Valves are to be of the pneumatically operated jacket pinch type with integral flanged joint ends. 阀门是气动操作套管夹紧类型，带整体法兰连接装置。
- All that is required is two gaskets in place of the one normally used in a flanged joint. 只需用两个垫圈替代通常用在法兰接头上的一个垫圈即可。
- She had to choke down her breakfast in order to catch her bus. 她不得不匆匆吃完早餐去赶公共汽车。
- Combining with flange joints fact and the ASME B16.20 to spiral wound gasket request, such as PN 6.3 MPa pipe flange in HG standard, the seating stress of spiral wound gasket was analyzed. 结合法兰连接的实际;按照ASMEB16.;20对缠绕式垫片压缩的要求;以HG标准中PN6
