您要查找的是不是:
- class AB power amplifier AB类功率放大器
- class AB power amplifiers AB类功率放大器
- The LV60 is typically pentode amplifier and is constructed in class AB for ca. 65 Watt power output. 两个机器的不同,从电阻可以看出。发出噪声的,就是更换过电阻的这台。
- However, most of Class AB amplifier power efficiency is below 70%, which reduces the overall system battery lifetime and increases the heat dissipation. 然而AB类放大器之功率效能最大不会超过70%25,功率损耗大都以热散逸的型式进而降低电池之使用时间。
- MCU Control System in AV Power Amplifie AV功率放大器中单片机控制系统
- Based on traditional two-stage amplifier,cross-coupled class AB output stage and cascode compensation were adopted to improve output voltage swing and bandwidth. 在传统两级运放的基础上,采用交叉耦合的AB类输出级和共源共栅补偿,提高了输出摆幅和带宽,并通过数学工具对功耗进行了优化。
- Design of Multistage Power Amplifier in Ku Band. Ku波段多级功率放大器的研制。
- Purpose: Medium power amplifier applications. 用途:用于中功率放大。
- Design of Class AB Output Amplifier in Audio Power Amps 音频功放芯片中AB类输出运放的设计
- Over the years, the commercial audio amplifiers are dominated by Class AB amplifier. 摘要:近些年来,商业用音讯放大器之应用以AB类放大器为主。
- Purpose: Audio frequency power amplifier applications. 用途:用于音频功率放大。
- Connect the Power Amplifier to Analog Channel B of the interface. 将功率放大器连接到接口上的模拟通道B。
- Purpose: Strobo flash, medium power amplifier applications. 用途:用于闪光驱动,中功率放大电路。
- You may check your idle current to make sure that yours is working in class A: the BJT version cannot run in class AB. 你可以检查一下你的静态电流,确保工作在A类:双极性晶体管版本不能工作在AB类。
- In the end, it introduced a new type class-d power amplifier DPPC. 本论文所完成的开关功放已完成样机试验。
- AB Power Group Company has adopted a series of policies on capital management since 1994 aiming to avoid financial risks and improve the benefits of capital. 自1994年以来,AB电力集团公司推行了一系列加强资金管理政策,旨在防范金融风险,提高资金使用效率。
- However, the linear power amplifier specially made is prohibiting expensive.In this paper, a kind of class D amplifier is proposed to replace the linear one. 专门制作的线性功率放大器价格极其昂贵,在本论文中,研制了一种取代线性功率放大器的开关类(D类)功率放大器。
- Purpose: Power amplifier applications, vertical output applications. 用途:用于功率放大和帧频输出。
- The power of the modulated carrier wave is increased by the RF power amplifier. 射频功率放大器增加了调变载波的功率。
- Purpose: Strobe flash applications, general power amplifier applications. 用途:用于闪光灯闪光驱动,一般功率放大。