您要查找的是不是：
- There is a clearance of only five inches. 只有五寸的间隙。
- Measuring clearance of rudder jumping stopper. 舵止跳块的间隙测量。
- Measuring installation clearance of rudder bearing. 舵轴承安装间隙测量。
- Made a clearance of clothes out of season. 清仓处理过季衣服。
- Clearance of this cheque could take a week. 这张支票兑现可能需要一个星期。
- Clearance of the theater during the fire was quick. 发生火灾时，剧院里的观众撤得很快。
- clearance of brazing 钎焊间隙
- joint clearance of brazing 钎焊间隙
- Clearance of the site required the removal of a number of trees. 清理这一场所需要移走不少树。
- The clearance of the old furniture made the room more spacious. 清理了旧家俱，屋里更宽敞了。
- Measure the clearance of bearing by pressing lead wires. 用压铅法测量轴承间隙。
- Arc brazing has the characteristics of braze welding and arc welding. 电弧钎焊是近十年来才发展起来的一种新型硬钎焊工艺，兼有钎焊和电弧焊的特点。
- May me ask you for prompt clearance of all invoiced accounts? 敬请尽速付清所有的发票帐款。
- There was a clearance of only ten centimetres between the two walls. 两堵墙之间只有十厘米的空隙。
- It indicates the strong retention of brazing alloy to diamond grits and the longer service life of the wheel. 这表明钎料合金对磨粒的高强度把持和砂轮的高耐用度。
- The clearance of vegetation will be a great threat to the wildlife. 把植被砍伐殆尽对野生动物将是极大的威胁。
- The results of performance testing of brazing show that the modificatory fluxes have reached the level of the same foreign products. 测试结果表明,改性后的银钎剂已达到国外同类产品的水平。
- A number of brazing alloys are available and a careful study should be made in every case to determine the proper alloy for the particular application. 对于特定的应用，则应该对市面上提供的许多铜焊合金以及每个具体应用进行详细的研究，以决定采用何种恰当的合金。
- The influence of brazing temperature and cladding ratio of filler metals on brazing quality of aluminum oil cooler for automobile engine was researched. 研究了汽车发动机铝油冷器钎焊温度和钎料包覆率对钎焊质量的影响,借助金相显微镜对钎缝组织进行了分析。
- Suitable for grinding the clearance of twist drill and square shank of taps. 使用于麻花钻头刃背削和丝锥方柄磨削。
