您要查找的是不是：
- Simulation of A Static Bubble Formation Process of Closed Cell Aluminum Foam 静态条件下闭孔泡沫铝气泡形成过程模拟研究
- Properties of Open Cell Aluminum Foams Prepared by Space-holder Method 添加造孔剂法制备开孔泡沫铝及其性能研究
- This is a closed cell material that will not bottom out, unlike other foams. 这是一个闭合的细胞材料，不会弹出来，不像其它的泡沫。
- In this review,research progress in structure-properties relationships of closed cell polymer foams especially polyolefin foams are presented. 综述了近年来对闭孔泡沫塑料,主要是发泡聚烯烃的结构与性能关系研究的进展。
- Fly ash particles act as viscosity increaser and increase stabilization of cell wall in the aluminum foam. 将粉煤灰加入到熔融铝液中,经适当搅拌后,再加入发泡剂,经冷却,即可得到颗粒增强泡沫铝。
- Thornton P H,Magee C L.The Deformation of Aluminum Foams [J].Metallurgical Transaction,1975,6A:1253-1278. 陈雯刘中华.;泡沫金属材料的特性;用途及制备方法[J]
- The quasi-static indentation experiments of the pure aluminum foams and the Al-Si alloy foams were carried on using three types of indenter with different end geometries,i. 分别采用头部为平面、球面和圆锥面的三种圆柱体压头,对泡沫纯铝和泡沫铝-硅合金进行了准静态压坑试验,研究不同性质的基体泡沫铝的压坑变形力学行为,探讨压坑变形的微观机制。
- There are various preparation methods of aluminum foams and these methods can be falled into three broad classes: liquid-phase method, solid-state method and deposition meth. 泡沫铝的制备方法有很多,可分为液相法、固相法和沉积法三大类。
- The results reveal that the deforming behavior and the energy absorption properties of aluminum foams are significantly affected by the property of their matrix. 结果表明,基体性能对泡沫铝的压缩行为和吸能性有显著影响。
- closed cell polyethylene foam backer rod 密封微孔聚乙烯泡沫垫棒
- The quasi-static three-point bending behavior of square aluminum extrusions with aluminum foam filler is studied. 摘要研究了泡沫铝填充的方形铝管的准静态三点弯曲行为。
- The subsidiaries INTEREP and SOCATEX of the HCM group account for practically fifty percent of the European market in closed cell rubber. 凭借其整合优势，集团正在向全球扩张，拓展产品的应用范围。
- Quasi-static axial compression tests are carried out to study the crushing behaviors of the aluminum foam filled hat sections. 通过试验方法研究了泡沫铝填充帽型结构准静态压溃时的吸能特性。
- The results show that coiling the powder together with steel plates can successfully form the structure of aluminum foam sandwich (AFS). 研究表明，采用粉末与钢板轧制工艺可以成功地制备出钢面板泡沫铝夹心结构；
- A nonlinear mathematical model is developed to describe the nonlinear deformation of a thin walled beam with the single closed cell under the influence of the nonlinear torsion. 考虑翘曲和大扭角变形的影响,研究薄壁梁结构轴向与扭转非线性耦合弹性变形问题。
- Moreover, the compr essive experiments for ZL104 foam alloy and aluminum foam with different densi ties were conducted.The results showed that the densit... 另外,对不同密度的泡沫ZL104合金及泡沫纯铝进行了压缩试验,结果表明:密度对压缩力学性能和吸能性具有显著影响;
- Preparation of Aluminum Foam Sandwich and Foam Cell 泡沫铝芯夹心板的制备及泡沫孔的研究
- Sealants closed cell (non gassing) backer rods vents weeps weep tubes weep retainers gutters end dams etc. as shown or as necessary within the system and to join the system to adjacent construction. 如建筑图所示，与本工程及相邻工程相关的填缝剂、背衬泡棉、透气孔、排水孔、排水管、排水孔泡棉押条、水沟、收口板。
- Our company is the company to produce the ALUMINUM FOAM. The ALUMINUM FOAM is a sound arresting material. It is applied the contructing a building material besides to the yeolubunya. 产铝泡沫。泡沫是一隔音材料,主要用作建筑材料。
- The aluminum foam is one of them, which are recyclable and possesses good environmental function(nontoxic and beautiful-looking) and its application prospect in industry is very broad. 泡沫铝属于多孔金属中的一种,具有很好的环境功能特性,无毒、美观且可回收,应用前景广阔。
