您要查找的是不是：
- In order to satisfy the demands of high precision of the coiling temperature,a genetic-neural network method to predict coiling temperature based on data mining is put forward. 为了满足卷取温度高精度的要求,提出了一种基于数据挖掘技术的遗传神经网络方法。
- Displaying the operating condition of the unit, including water temperature, coil temperature, and compressors accumulative running hours, ect. 中文显示显示主机的运转状况,包括出水温度、盘管温度、压缩机累计运转时数等。
- Based on the feasibility experiment and analyses,an intelligent defrosting scheme using the comparison calculation of indoor coil temperature is put forward. 在可行性实验和分析的基础上,提出一种基于室内盘管温度比较运算的智能化除霜方案。
- The effect of coiling temperature on second-phase of inter-magnetic shielded steel was observed and analyzed by transmission electron microscope (TEM) and scanning electron microscope (SEM). 采用透射电镜和扫描电镜对经不同卷曲温度卷曲的热轧内磁屏蔽钢中的第二相进行测试分析。
- The microstructure changed from ferrite plus pearlite to bainite and martensite, and the strength increased when the elongation decreased with the decreasing of coiling temperature. 结果表明：卷取温度降低，钢的强度上升，伸长率下降，组织由铁素体+珠光体向贝氏体、马氏体转变；
- In this paper, the first to use Adaptive Neuro-Fuzzy Inference System on the finishing temperature was forecasted, the establishment of the coiling temperature model predictive control. 本文首先利用自适应神经模糊推理系统对终轧温度进行了预测，建立了卷取温度预测控制的模型。
- The algorithm is used in simulation to control the coiling temperature of hot strip rolling, and the results validate the efficiency and precision of the algorithm in coiling temperature control. 应用该算法对热连轧带钢卷取温度的精冷区控制进行了仿真研究；结果表明，该控制器能够把带钢卷取温度控制在预定的范围内，控制精度能够满足生产要求。
- For the model of laminar cooling control of hot rolled strip,the accuracy of coiling temperature control is unsatisfactory because the heat transfer in the strip itself is ignored. 在热轧带钢层流冷却控制数学模型中，由于忽略带钢内部的热传导而使卷取温度控制精度不良。
- To improve the accuracy of target coiling temperature, and obtain the good structure capability, the hot roll mill introduces the adaptive control system of laminar flow cooling system. 摘要为了提高目标卷取温度的精度，获得组织性能和机械性能优良的带钢，某热轧厂采用了层流冷却自适应控制系统。
- Optimization of Coiling Temperature Control Model 卷取温度控制模型的优化
- hot steel strip coiling temperature 热轧带钢卷取温度
- In the production process, hot metal s chemical composition, heating and coiling temperatures and continuous annealing conditions while being rolled, will affect properties of tin-plates . 生产过程中,炼钢的化学成分、热轧的加热与卷取温度及连续退火的工艺条件都会对镀锡板的性能产生影响。
- Magnetic properties (including lower iron loss and higher magnetic flux) of non-oriented electric steel can be obtained effectively through controlling slab heating, rolling and coiling temperatures. 通过对大生产中大量实验的分析,就热轧工序温度制度对无取向电工钢电磁性能的影响情况进行了比较详细的阐述。
- A small adjustment will equalize the temperature in the two rooms. 稍作些调节就会使两间房内的温度相等。
- There is an imperceptible change in temperature. 温度有细微的变化。
- Leading Process Control of Hot Strip Coiling Temperature 热轧带钢卷取温度过程前置控制
- The food should be kept at low temperature. 这种食品应低温保存。
- The temperature of volcanic gases is very high. 火山气体的温度很高。
- Lead will fuse at quite a low temperature. 铅会在相当低的温度下熔化。
- The temperature fell sharply in the night. 夜间温度急剧下降。
