您要查找的是不是：
- cold zinc coating material 冷涂锌涂料
- A zinc coating is applied to the steel for rust protection. 镀锌层是用来防止钢铁生锈的。
- Progress of molybdate passivating for zinc coating is stated. 本文综述了国内外镀锌层钼酸盐钝化的研究概况。
- A soft, adhesive coating material, such as plaster, grease, or mud. 涂料柔软粘稠的涂抹原料，如泥灰、润滑脂或泥浆
- A chromium-free colorful passivation technology for zinc coating was developed. 研究了用于锌镀层彩色钝化的无铬钝化液最佳配方及工艺。
- The coating material of copolymer has good hardness and glossiness. 共聚物的涂膜具有较好的光泽度及硬度。
- Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming - Technical delivery conditions. 冷冲压用连续热镀锌的低碳钢制的板材和带钢。交货的技术条件。
- Lead as a coating material for the thermal conduXXXon module c-ring. 型环导热模块涂层材料中的铅;
- Apply on properly blast cleaned steel or directly over inorganic zinc coating in good condition. 施工于适当处理的钢材表面上，或直接施工于状态良好的无机富锌涂层之上。
- Lead as a coating material for the thermal conduction module c-ring. 热导枪钉模组涂层中所用的铅。
- Galvanic, zinc coating, trivalent black zinc coating, tin plating, trivalent zinc coating,... 分类标题：钢材和金属镀锌|钢材和金属热处理...
- The preparation of metallographic specimen of mechanically deposited zinc coating is the key to study the coating tissue and structure. 机械镀锌层的物理结构特征不同于热浸锌层及电镀锌层,其金相试样的制备是镀层组织、结构研究的关键。
- The physical structure characters of mechanically deposited zinc coating are different from that of hot-dipped zinc coating and zinc plating deposit. 机械镀锌层的物理结构特征不同于热浸锌层及电镀锌层,其金相试样的制备是镀层组织、结构研究的关键。
- The effect of ceria nanoparticles on the electrodeposited zinc coating is studied by electrochemisty and NaCl immersion test,respectively. 结果表明,相对于纯镀锌镀层,复合镀层晶粒细小,平整光滑,显微组织均匀、致密,并且镀层耐蚀性能有提高。
- Single-deck area in place of the coated material is laminated. 应用领域为单层涂布材料代替多层复合材料。
- Y-bearing with zinc coated bearing rings and special non-toxic grease. Y-轴承,带镀锌轴承圈和特种无毒性油脂。
- Y-bearing with zinc coated bearing rings and zinc coated locking collar. Y-轴承,带镀锌轴承圈和镀锌锁定环。
- It is concluded that hydrogen brittlement of the disloation-tooth circletproduced during zinc coating is the reason of fracture failure. 通过金相显微镜观察、扫描电镜分析、能谱分析和含氢量的测定,得出错齿垫圈断裂失效是由于在镀锌过程中产生氢脆的结论。
- Chromalasion material is a type of inorganic coating material made by utilizing semiconductor compound technology. 柯玛丽晶材料是一种利用半导体合成技术研制成的无机涂料。
- The optical property of VO2 coating materials was analyzed by FTIR. VO2粉末涂料之光学及相变性质则是藉由FTIR来量测。
