您要查找的是不是：
- By the use of temperature characteristic of the semiconductor PN junction thermocouple cold end compensating circuit was designed. 利用晶体管PN结温度特性设计出热电偶冷端补偿电路,并对常用热电偶冷端补偿方法进行比较分析。
- Cold End Compensating to General Thermocouples Based on Temperature Characteristic of the Semiconductor PN Junction 基于晶体管PN结温度特性的热电偶冷端补偿
- thermocouple cold end compensator 热电偶冷端补偿器
- cold end compensating 冷端补偿
- A nice--cold end to their love affair. 这真是一个爱情故事的冰冷结局。”
- The ID of the SER cold end is normally plugged. SER型硅碳棒的冷端部的内径通常是堵上的。
- cold end compensation 冷端补偿
- The RU is normally installed with the cold end through the wall of the furnace. 这种RU型硅碳棒通常从冷端部穿过炉壁进行安装。
- the cold end compensation 冷端补偿
- The SER element is supplied with a ceramic collar cemented to the extremities of the cold end. 这种SER型电热元件是用陶瓷卡圈将其固定在冷端部的末端。
- The restriction on the temperature relates to the terminal or cold end portion of the Element. 对于温度的限制主要归因于该产品的冷端部或者说是终端部。
- The displacer piston now moves, shunting the gas to the cold end of the cylinder. 活塞的置换现在动作，调气，以冷战结束缸。
- The cold end of the SER element is flame sprayed with aluminum for a distance of about two inches. 对冷端部进行喷铝是要保持大约两英寸的距离。
- This paper describes the causes of angle bump of float glass when conveyed at the cold end while being longitudinally cut on the production line . 探讨了浮法玻璃在冷端输送过程中,玻璃板在主线上纵向掰断并分开所产生的两块玻璃尾端碰角的现象。
- The optimum phase difference between pressure and gas flow at pulse tube cold end can be achieved by controlling phase of the input pressure at each regenerator hot end. 分析表明,该调相方法可使脉管冷端流量与压力同相,从而使制冷量最大,而且相比于传统的小孔加气库型和双向进气型脉管制冷机,其制冷效率大大提高。
- This strain of wheat can grow during a cold spring. 这种小麦可以在寒冷的春天生长。
- The cold weather at last broke at the end of March. 寒冷的天气终于在三月末结束了。
- The first several inches of the cold ends are metallized with aluminum to provide a low-resistance contact surface. 硅碳棒的冷端部的两端的接触面喷了少量铝来降低阻值。
- The girl stood shivering with cold on the doorstep. 那姑娘站在门前的台阶上,冷得直打哆嗦。
- In addition, in order to avoid conducting the heat which results from the clea- rance of bearings to the cold end of the turbine, a special construction of jou- rnal beairngs cooled by water inside is employed. 此外,为了避免轴承间隙内生成的热量传到透平冷端,采用了轴承内腔水冷却的结构。
