您要查找的是不是：
- The curing behavior,mechanical properties,compression elastic modulus and dynamic mechanical properties of CR/SBR blends were investigated. 探讨了氯丁橡胶(CR)/丁苯橡胶(SBR)共混胶料的硫化特性,共混硫化胶的力学性能、压缩弹性模量和动态力学性能。
- Discussion on Increase Trend of Strength and Compression Elastic Modulus of Cored Slabs and Beams Along with Concrete Age 空心板梁混凝土强度与抗压弹性模量随龄期增长趋势探讨
- compression elastic modulus 压缩弹性模量
- DISTRIBUTION OF COMPRESSIVE ELASTIC MODULUS AND STRENGTH OF THE BRAKE-LINING COMPOSITE MATERIALS AND PREDICTION OF STRENGTH 闸瓦复合材料压缩弹性模量和压缩强度的概率分布及其强度预测
- The static elastic modulus of the alloy is lower than 30 GPa. 合金的静态弹性模量小于30GPa;
- When Mo content is 10%,the synthetical properties of the Ti-Mo alloy are the best. The data of hardness(4510 MPa),compression strength(1636 MPa),compression ratio(22.5%) and elastic modulus(29.8 GPa) were collected. Mo含量为10%25;合金的综合性能最好:硬度为4510 MPa;压缩强度为1636 MPa;压缩率为22.;5%25;弹性模量为29
- The properties of compression strength, bending strength, tensile strength, binding strength and elastic modulus of epoxy mortar modified with flexibilizer and fiber have been studied. 研究了掺增韧剂和纤维进行改性的环氧砂浆抗压、抗弯、抗拉、粘结及弹性模量等性能。
- elastic modulus in tension and compression 拉压模量
- The various types of stress, strain, and elastic modulus are summarized in Table 10-3. 各种应力、应变和弹性模量列于表10-3中。
- elastic modulus of tension and compression 拉压弹性模量
- elastic modulus of tensile compression 拉压弹性模数
- The larger the elastic modulus, the greater the stress needed for a given strain. 弹性模量越大，产生一定应变所需要的应力也越大。
- The ratio of stress to strain, or the stress per unit strain, is called an elastic modulus of the material. 应力与应变之比，即每单位应变的应力，叫做该材料的弹性模量。
- However, the elastic modulus of SCC is not significantly affected by S/A ratio when total aggregate volume is kept constant. 然而对弹性模数而言，当骨材总体积量一定时，改变混凝土含砂率对于弹性模数并没有太大的影响。
- The equivalent elastic modulus was deduced by comprehensive considering deflection and elastic modulus. 通过综合考虑挠度引起弹性模量和弹性伸长引起弹性模量推导出等效弹性模量。
- The effects of fiber distributing orientation and its length on elastic modulus of solidified resin are discussed. 依据复合材料相关理论预测了固化层片及固化零件的机械性能，如弹性模量、强度。
- The elastic modulus of foam core and composite skins and the stiffness of sandwich are analyzed. 分析了复合材料面层的弹性常数、泡沫芯层的模量和夹层结构的刚度;
- The elastic moduli Eijlm represents a tensor of the fourth order. 弹性模数Eijlm表示一个四阶张量。
- The study shows that the elastic modulus of the unconsolidated rock is very low. 随着含水饱和度的增大,弹性模量减小,泊松比的变化规律不太明显;
- A tipless cantilever was used to measure the elastic modulus of the single voxel with the ellipsoid shape. 借助于原子力显微镜，选用无针尖探针对成型点的力学性能进行了测试，建立了椭球-平面接触的弹性力学模型。
