您要查找的是不是:
- computation of cutting force 剪切力计算
- The variation of cutting force and cutting temperature for Al-Si alloy cutting with diamond cutter are investigated. 研究金刚石刀具切削硅铝合金时切削力和切削温度的变化规律。
- The crystallographic nature of cutting force variation was analyzed based on Crystal plasticity. 作者还根据晶体塑性力学理论,分析了产生这种变化的根源。
- Aiming at little fluctuation of cutting force of glass bulb panel's surface, the best tool path is three dimension and the second is furthest highness. 以切削力波动最小为目标,加工屏凸模表面刀具切削路径优先选择三维偏置法,其次选择最佳等高法。
- The model of angle of chip flow and the model of cutting force of CMFDare established using“Similar 2D”methods and minimal energy methods. 用“类二维”法和最小能量理论,建立群钻流屑角模型和钻削力预测模型,推导了群钻钻削能的理论计算公式。
- A predictive model of cutting force was developed by using a full-factorial experimental design and multi-linear regression technology. 应用全因子实验设计和多元线性回归技术建立了切削力预测模型,采用方差分析方法检验了预测模型的拟合度及各独立输入参数的显著性。
- The influences of cutting parameters on cutting force and its fractal dimension, surface roughness on the Fractal Theory during glass cutting is presented. 基于分形理论研究了玻璃切削时不同切削参数对切削力及其分形维数以及表面粗糙度的影响。
- Probe into coefficient of count the number of cutting force in the homing super-hard steel from research into fine horning system and it's cutting dats. 摘要通过对超硬钢精密镗削工艺系统及切削实验数据的分析研究,探讨超硬钢镗削的切削力系数。
- Probe into coefficient of count the number of cutting force in the borning super-hard steel from research into fine borning system and it's cutting dats. 通过对超硬钢精密镗削工艺系统及切削实验数据的分析研究,探讨超硬钢镗削的切削力系数。
- This paper anlayses and strudies effect of cutting force,clamp force, rotational inerta,gravity on working accuracy of thin_wall long cylindric part machined with double_tool. 分析和研究了双刀切削加工薄壁长筒类零件时,切削力、夹紧力、惯性力、重力对加工精度的影响。
- She has a book full of cuttings about her film. 她有一本书贴满了关于她的一些影片的剪报。
- A cutting force model in turning on cutting parameters (the depth of cut, feed rate, workpiece material and tool material) and tool condition (focusing on tool flank wear) was developed. 摘要建立刀具状态监控特徵量与切削参数及刀具状态之间的定量或定性关系是实现刀具状态监控系统的基础。
- The accuracy of cutting heat measurement by the calorimetric method was finally evaluated by comparing the total cutting heat flux with the power resulting from the main cutting force. 将算出的总热流量与主切削力的功率相比较,评判用量热法则量切削热时的精确程度。
- The paper compares and analyzes the cutting force under some different kinds of major cooling methods through the results of cutting experiment.It shows the superiority of OoW green cutting fluids. 通过车削试验,比较和分析了不同冷却润滑加工方法下的切削力,揭示出雾状油膜水滴绿色切削液的优越性。
- The computation of the Dismal Days was very complicated. 推算不吉利日是非常复杂的。
- As the PVC skin texture soft, turning an ordinary method of cutting force of the General Assembly to make PVC skin due to have a greater deformation, resulting chip can not be successfully cut. 由于PVC蒙皮材质软,用普通方法车削因切削力大会使PVC蒙皮产生较大的变形,从而导致切屑不能顺利切下。
- The mechanism of cutting force, cutting temperature and tool wear in the machining of quenched steel and nickel based high temperature alloy with ceramic tools are analyzed in the paper. 重点分析了陶瓷刀具在切削淬火钢和镍基高温合金中有关切削力、切削温度、刀具磨损等方面的机理。
- Based on the experiments of cutting engineering ceramics by diamond saw blades, the factors of influencing cutting forces are an alyzed. 在用金刚石锯片切割工程陶瓷材料的切削试验基础上,对影响切削力的各种因素进行了分析。
- The variation regularities of cutting forces of the PCD tools with different geometric parameters in turning aluminum alloy are studied. 研究了不同几何参数的PCD刀具车削铝合金时切削力的变化规律。
- S.T.Chiang and C.M.Tsai and A.C.Lee, “Analysis of Cutting Forces in Ball-End milling”, Journal of Materials Processing Technology 47 ,p231-249,1995. 黄鸿颖“结合激振能之铣抛削系统之加工性能分析“,硕士论文,国立台湾海洋大学,2002。