您要查找的是不是：
- contact thermal conductance 接触热传导
- An experimental study of the effects of loading on contact thermal conductivity 载荷对接触热导影响的实验研究
- contact thermal conduction 接触热导
- Thermal conductivity varies for different gases. 热传导率因不同气体而异。
- The product are resistant to corroion ,oil ,abrasion ,thermal conductance,shock,absortive to sound and nonconductive . 产品具有耐腐蚀、耐油、耐水、耐磨、抗热导、抗振、吸音、不导电等特性。
- A new method of improving thermal conductance gas analyzer was introduced,which adopted BP neural network. 介绍了利用BP神经网络对传统热导气体分析仪改善的新方法。
- Low thermal conductivity,low thermal capacity. 低导热率，低热容量。
- Density of products, and low thermal conductivity. 产品密实性好，导热系数低。
- The thermal conductivity of the wood is poor. 木头的导热性很差。
- It is difficult for a surgeon to deal with the extensive and deep wounds due to severe electric and contact thermal burn. 摘要严重电灼伤及接触性灼伤所造成的既深且广泛的伤口对外科医师是一项挑战。
- Thermal conduct ivity, the ability of a material to t ransferheat energy along its length,w idth, o r th ickness. (热的导电率,材料沿着它的长度、宽度或厚度转移热能源的能力。
- The results are 1) thermal expansion, and 2) thermal conductivity. 结果导致：1）热膨胀，和（2）热导率。
- The existence of the contact resistance must be considered when accurate thermal conductivity measurements are performed. 如果要精确地测量热导率，就必需考虑接触阻力的存在问题。
- Weave characteristics :plain weave ,single twill weave and double twill weave.The product are resistant to corroion ,oil ,abrasion ,thermal conductance,shock,absortive to sound and nonconductive . 编织及特点：一般为平纹编织和半绞织，全绞织。产品具有耐腐蚀、耐油、耐水、耐磨、抗热导、抗振、吸音、不导电等特性。
- Study on thermal conductivity of the YAG and GGG laser crystal[J]. 引用该论文 王保松;江海河;贾先德;张庆礼;孙敦陆;殷绍唐.
- The results show that there exists great difference between the actual results and the measured results.Heat radiation and thermal conduct have been unanalyzed theoretically. 我们从理论上分析了由于热辐射、热传导影响,得出锥形吸收腔时间温度曲线关系的数学模型;
- Based on the thermal conduct theory and cure kinetics,the history of cure temperature and degree of cure was investigated for the orthotropic laminate during curing. 根据热传导和固化动力学理论,采用三维有限元方法,对正交各向异性复合材料层合板固化过程的温度和固化度历程及其变化规律进行数值模拟研究。
- The technician plotted the thermal conductivity versus mean temperature. 技术人员勾绘出导热率对应平均温度的曲线。
- It is stressed that enhancing the effective thermal conductivity of the adsorber and decreasing the contact resistance are key technologies in this system. 文中还讨论了不同工况、不同物性对性能的影响，指出提高吸附剂当量导热系数、减少与壁面的热阻是该系统成败的关键。
- Weave characteristics: plain weave, single twill weave and double twill weave. The product are resistant to corroion, oil, abrasion, thermal conductance, shock, absortive to sound and nonconductive. 编织及特点：一般为平纹编织和半绞织，全绞织。产品具有耐腐蚀、油、水、磨、热导、振、音、导电等特性。
