您要查找的是不是:
- contacting mechanical seal 接触式机械密封
- non- contacting mechanical seal 非接触式机械密封
- Mechanical seal with inside mounted spring. 弹簧置于密封流体之内的机械密封。
- It can also replace with mechanical seal type 224UU mutually. 可与224UU型机械密封互换。
- The design thinking model of non_ contacting seal is put for ward based on expatiate on mechanical seal using traditional thinking, and view its significance from philosophial point. 在用传统的思维阐述机械密封的基础上,提出了非接触密封的设计思维模式,并从哲学的角度看待其意义。
- The shaft seals use quality mechanical seal. 采用加长轴电机直联结构,轴封采用优质机械密封。
- non - contacting mechanical face seal 非接触式机械密封
- Sealed with the Burgmann MG1 elastomer bellows mechanical seal. 其密封选用博格曼MG1橡胶波纹管机械密封。
- contacting dry running mechanical seal 接触式干运转机械密封
- Establishing a steady and expedite contact mechanism. 一、建立稳定畅通的工作联系机制。
- The inner mechanical seal shall be constructed with a solid block carbon rotating seal face and a solid block silicon carbide stationary seal face. 内置的机械密封结构应该采用一块整体结晶碳旋转密封面和一块整体结晶碳化硅固定密封面。
- It adopts mechanical seal as standard equipment, which excludes leakage and brings easy maintanence. 采用机械密封作为标准配置,消除了泄露,维护简便。
- The main pump consists of casing, impeller, rectifier, shaft, bearing, mechanical seal and half-coupling. 主泵由泵壳、叶轮、整流器、轴、轴承、机械密封、半联轴节等组成。
- Shaft seal: WB2 externally mounted F4 bellows mechanical seal to achieve dependable seal and long service life. 轴封:采用WB2型外装式F4波纹机械密封,密封可靠,使用时间长。
- An experimental study of the performance of the new type upstream pumping mechanical seal. 新型上游泵送机械密封的性能研究
- It is of built-in type, single seal face, single spring and rubber-bellows mechanical seal. 内装式、单端面、单弹簧、橡胶波纹管机械密封。
- Frequent leakage of mechanical seal of quenching oil circulating pump was a hard problem in ethylene production. 急冷油循环泵的机械密封频繁泄漏是困扰乙烯生产的老难题。
- Changes in the spring performance will directly affect the mechanical seal face pressure. 弹簧性能的发生变化将会直接影响机械密封端面比压。
- The leakage of the mechanical sealing of this pump is severe. 这台泵的机械密封泄露严重。
- Application of Non- contacting Mechanical Face Seal on Centrifugal Compressor 非接触式机械密封在离心压缩机上的应用