您要查找的是不是：
- There are microcrack and microhole in them.The radical cause is serious segregation of continuous cast steel billets. 偏析带组织为非索氏体，其强度高，塑性差，在轧制过程中易产生微裂纹和孔洞；
- According to heredity of segregation of continuous cast steel billets, effective measures have been taken against segregation. 因此，针对连铸坯偏析的遗传性，制定了改进措施，经生产证明其效果显著。
- A control problem for boundary thermal flux of continuous cast steel is considered.By the control for boundary thermal flux, let thermal distribution in steel ingot approach ideal station. 摘要考虑了一个对连续铸钢边界热对流控制问题，通过对边界流的控制，使钢锭中热的分布尽可能接近理想状态。
- A control problem for boundary thermal flux of continuous cast steel is considered.By the control for boundary thermal flux,let thermal distribution in steel ingot approach ideal station. 考虑了一个对连续铸钢边界热对流控制问题,通过对边界流的控制,使钢锭中热的分布尽可能接近理想状态。
- The shape defects of continuously cast steel include rhomboid and protuberance which often occur in continuous casting. 本文讨论的内容属于连铸坯质量分析专家系统研究的一部分,包括连铸坯菱形变形和鼓肚变形分析两个独立的子系统。
- Steel Mill in South America has successfully tested, and uses, Red Valve Type A Pinch Valves on dry Calcium Oxide in fine grain size on their continuous casting steel process. 在南美洲的一座钢厂里，美国红阀公司A型夹管阀已经成功地通过测试并成功地应用在连续铸钢工艺中的细粒生石灰控制过程中。
- Inverse Algorithm of Heat Transfer in Mould for Continuous Cast Steel Slab 板坯连铸结晶器传热反算方法研究
- The new hot scissors of swfacing continuously cast steel billet 新型堆焊连铸钢坯热剪刀片
- Distinction Condition of the Optimal Solution for Control Model of Boundary Flux in Continuous Cast Steel 连续铸钢中边界冷却系统控制模型最优解的判别条件
- Cast steel valve installation at an oil refinery. 安装在炼油厂的铸钢阀门。
- More new steel grades are continuously cast. 浇铸钢种的扩大;
- The robot can cast steel after being reprogrammed. 在重新设定程序之后,机器人能浇铸钢材。
- Center Cracks Control of Continuous Cast Slab at Meishan Iron and Steel Co. 梅山连铸板坯中心裂纹的控制。
- Surface Quality Control of Continuous Casting Steel Based on MTM System 基于MTM系统的铸坯表面质量控制
- Effect of welding thermal cycle on toughness of continuous casting steel center 焊接热循环对连铸钢中心冲击韧度的影响
- The cast steel cools after passing through several water walls. 铸钢反复经过水冷壁之后，冷却下来。
- Adopt two cast steel rods,which connect the down cutter part. 采用两个铸钢连杆，连接下节切刀部件。
- This must be your continuous casting machine. 这一定是你们的连铸机。
- The type of caster is arc continuous casting. 连铸机型式采用弧形连铸。
- Resists high temperature fluctuations which damage cast steel valves. 抗高温波动,这种波动往往会损坏铸造阀门。
