您要查找的是不是：
- continuous extrusion cladding (Conclad) 连续挤压包覆
- Experimental Study of Copper-Clad Steel Wire by Continuous Extrusion Cladding Technology 铜包钢线连续挤压包覆工艺试验研究
- Experimental research on continuous extrusion cladding forming of the copper-clad steel contact wire blank 铜包钢接触线坯连续挤压包覆成形的实验研究
- Study on the device of protecting the CATV coaxial cable core from being burnt in continuous extrusion cladding 连续挤压包覆CATV同轴电缆芯线防灼伤系统研究
- continuous extrusion cladding 连续包覆
- By the means of the continuous extrusion process aluminum clads steel core, and then the steel core clad with aluminum is drawn into a finish product. 针对连续挤压包覆工艺,给出了变形温度、变形速度、钢线预热温度、钢线速度和钢线张力等工艺参数的确定原则,提出了各工艺参数的控制范围。
- By the means of the continuous extrusion process aluminum clads steel core,and then the steel core clad with aluminum is drawn into a finish product. 针对连续挤压包覆工艺，给出了变形温度、变形速度、钢线预热温度、钢线速度和钢线张力等工艺参数的确定原则，提出了各工艺参数的控制范围。
- The influencing factors and technical problems of continuous extrusion of microcellular plastic foams are explained. 阐述了塑料微孔发泡连续挤出成型中的众多技术难点和影响因素。
- Keywords carrier cables;extrusion cladding;extrus on dies;technology design;thermit welding/extrusion strength; 承力索;挤压包覆;挤压模;工艺设计;铝热焊/挤压力;
- A set of machine using in strengthening the copper strip in the continuous extrusion process is developed in this paper. 本文设计了一台专门用于对连续挤压生产铜扁线进行强化的智能控制的强化装置。
- The microstructure for copper strip produced by traditional drawing anneals method and continuous extrusion method are analyzed. 分析了传统拉拔退火法和连续挤压法生产铜扁线的组织。
- The development status of continuous extrusion processing technology of microcellular plastics with supercritical CO2 fluid as foaming agent was rev... 综述了国内外超临界CO2辅助微孔塑料连续挤出加工技术的发展状况,提出了今后的研究方向。
- Through comparing it shows that continuous extrusion method is a better method of producing copper strip than conditional drawing anneals method. 通过比较,得出连续挤压法是一种优于传统拉拔退火方法的铜扁线生产方法。
- Abstract: At present,in continuous extrusion processing of micro-cellular plastics,the two pressure drop cell nucleation apparatus of the nozzle and gear pump are used. 文摘:在连续微孔挤出加工中，当今采用喷嘴和齿轮泵两种快速压降成核装置。
- At present,in continuous extrusion processing of micro-cellular plastics,the two pressure drop cell nucleation apparatus of the nozzle and gear pump are used. 在连续微孔挤出加工中，当今采用喷嘴和齿轮泵两种快速压降成核装置。
- The progress of research on preparing methods of microcellular PC foams was summarized, including batch microcellular foaming,continuous extrusion and mould pressing . 阐述了聚碳酸酯(PC)微孔泡沫塑料的制备方法,包括间歇成型法、连续挤出成型法、模压成型法;
- Continuous extrusion technology and its die structure have been determined via stress analysis in ex-trusion forming and characteristics of material itself,with satisfactory effect in practical use. 通过挤压成形的应力分析,确定了连续挤压工艺及其挤压模结构,在实际应用中取得了令人满意的效果。
- The results indicate that continuous extrusion(CONFORM) can remarkably thins the grains and modifies the grain orientation of AZ31 magnesium alloys and significantly enhances the ductility. 结果表明,连续挤压能有效的细化AZ31合金的晶粒和改变晶粒取向,致使延伸率得到了大幅提高;
- According to the viscoplasticity of the polytetrafluoroethylene (PTFE), the fluctuation in the process of extrusion becomes smaller and smaller, and realize continuous extrusion finally. 与传统液压式柱塞挤出机相比，具有冲压频率高，熔融塑化效果好，产品质量好，设备和工艺过程简单等特点。
- The knight was completely clad in armor. 那位骑士全身披挂盔甲。
