您要查找的是不是:
- Analysis of the Cooling Condition on No.4 Blast Furnace of Baotou Steel Corp. 包钢4%23高炉冷却状况分析。
- STORAGE It should be stored in closed, cool condition and kept away from flame. 密封、阴凉和远离明火。
- The relations between diluent kinds,concentration of the polymer,cooling condition,additive et al and phase diagram,microstructures ... 综述了稀释剂种类、工艺参数(高聚物浓度、冷却条件)和添加剂等因素对热力学相图、相分离机理、微孔结构及材料性能的影响。
- The effects of cooling condition on the spinning quality and the mechanical properties of PP spunbonded nonwovens in the production are studied. 研究了在聚丙烯纺丝成网非织造布生产中,冷却条件对纺丝性能及非织造布物理机械性能的影响。
- Dry, cool conditions, faraway from fire and heat source. 干燥;凉爽环境下;远离火源;热源.
- In actual reactors, the cooling condition outside the hexcan-wall of blocked fuel subassembly is analogous to its counterparts in the SCARABEE BE+ experiments. 结果表明:1) 对实际快堆中发生全堵的燃料组件而言,其外部的冷却条件与SCARABEE BE+系列实验非常相似;
- This Paper investigates the effects of the lengths of A-ype graphite and the per centages of D-ype graphite on the anti-xidizing properties of gray cast iron on the basis of the experiments of the variations of Ti content and the mold cooling condition. 试验了合金元素钛以及铸型冷却条件对灰铸铁抗氧化性的影响,研究了石墨大小和D型石墨的含量对灰铸铁抗氧化性的影响。
- The results indicated that the steel is composed of quasi bainite, lath martensite and twin martensite under air cooling condition, and also has better combination of strength and toughness. 试验表明:该钢空冷条件下即可获得准贝氏体、板条马氏体及孪晶马氏体的复合组织,且具有较好的强韧性配合。
- By using numerical simulation, the cooling time, and the different in temperature and thermal stress of the YAG medium and the GGG medium at different cooling condition were obtained. 利用数值模拟,得到了YAG介质和GGG介质在不同冷却条件下的冷却时间、温差和热应力。
- The minimum fluidizing velocity and operating fluidizing velocity were obtained by experiments at cooling conditions. 通过冷态流化实验,得到了最小流化速度和操作流化速度。
- Results In different seasons cooling conditions,a different location on the same sterilization 5-Qiangjia base fur fural content different. 结果:不同季节不同降温条件、同一灭菌车上不同位置5-羟甲基糠醛含量不同。结论:5-羟甲基糠醛检测取样位置在灭菌车次上层中央位置;
- The influence of cooling conditions on the quality and metallurgical properties of sinters was studied in lab.The results show, that the heat preservation cooling is the best. 通过实验室体系研究了不同的冷却制度对烧结矿质量以及冶金性能的影响,对比分析结果表明,采用保温冷却综合效果最好,在冷却过程中采用变风量冷却对于提高烧结矿成品率有利。
- The effects of spinneret hole shape, characteristic dimension of spinneret ,hole arrangement and cool conditions on degree of profile were discussed. 异形喷丝孔的当量直径、截面积、孔长等特征尺寸决定了熔体在喷丝孔中的流变行为,建议采用当量异形度作为纤维的异形度指标。
- equivalent dry cooling condition 等价干工况
- Do exercise every day and you'll be back in condition. 每天锻炼锻炼,你很快会恢复健康的。
- He insists the condition to use the best material. 他坚持以使用最好的材料为条件。
- John couldn't keep cool when he met his rival. 约翰见到他的对手就不能冷静下来。
- You must on no condition tell him what happened. 你决不能把发生的事情告诉他。
- My new car cost me a cool thousand pounds. 我的新车整整花了我1000镑。
- In cooling, the rivet contracts. 铆钉在冷却时会收缩。