该词条未找到_海词词典

您要查找的是不是：

A novel internal core pulling mechanism of injection mould is designed for the part with internal full circle undercut. 针对具有整圆内侧倒扣特征的注塑件,设计了一种新颖的注塑模内缩机构。
The structure peculiarity of this injection mould was a two-parting surface, and was a side core pulling mechanism. 此注射模设计的结构特点是点浇口形式的双分型面的注射模，是侧向抽芯。
The CAD system of bevel pin core pulling mechanism has been successfully developed on the SolidWorks 2003 platform,in which the design was based on KBE technology,C++6.0 was chosen as programming language and COM technology was used. 介绍了在SolidWorks 2003开发平台上;依据KBE技术的设计思想;选用Visual C++6.;0为编程语言;运用COM技术的斜销抽芯机构计算机辅助设计系统的开发。
In order to shorten the core pulling distance and reduce the volume of die casting die, a mould with four angled-lift gliding block for parting and core pulling mechanism was designed. 为减小成形梯形楷型芯的抽出距离，减小压铸模体积，设计了带有四开式斜滑块分型抽芯机构的压铸模。
In order to shorten the core pulling distance and reduce the volume of die casting die,a mould with four angled-lift gliding block for parting and core pulling mechanism was designed. 为减小成形梯形槽型芯的抽出距离,减小压铸模体积,设计了带有四开式斜滑块分型抽芯机构的压铸模。
The Way of Installing Core Pulling Mechanism in Moving Forward Block 抽芯机构设置在动模推块上的方法
Keywords Nether Decoration Lid;Injection Moulding;Mould;Core Pulling Mechanism; 关键词下装饰盖;注塑;模具;抽芯机构;
Stress analyzing of the side core pulling mechanism by bevel pillar of ejection mould 注射模斜导柱侧向抽芯机构受力分析
Design of Hydraulic Pressure Core Pulling Mechanism for the Injection Mould of Three- way Pipe 顺水三通管注射模液压抽芯机构的设计
Design of the Injection Mold with Arc Side Core Pulling Mechanism for Forcing-Out Type Bottle Cap 基于弧形侧抽芯机构的压出式瓶盖模设计
Development of CAD System of Bevel Pin Core Pulling Mechanism in the Die-casting Mould Based on KBE 基于KBE的压铸模斜销抽芯机构计算机辅助设计系统的开发
Analysis on the Module of Bevel Pin Core Pulling Mechanism of Die-casting Die CAD System 压铸模CAD系统斜销抽芯机构模块分析
Keywords injection mould;ejector in the Fixed Half;slanted guide pillar;core pulling mechanism; 注塑模;定模推出机构;斜导柱;抽芯机构;
internal core pulling mechanism 内缩机构
Core pulling mechanism 抽芯机构
side core pulling mechanism 侧抽芯机构
A special mechanism for arc side core pulling was used in the mold to solve the problem of demolding from arcuate orifice. 在模具中设计了弧形侧抽芯机构,解决了产品弧形孔脱模难的问题。
The mechanism of tightwire and idler wheel is adopted in the mould for angle core pulling of the angle bracket castings.There is a cooling system in the mould. 该模具采用钢丝绳-滚轮抽芯机构实现斜支架塑件的斜向抽芯,模具还设有冷却系统。
A mechanism of tightwire and idler wheel are adopted in the mould for angle core pulling of the angle bracket castings.There is a cooling system on the mould. 该模具采用钢丝绳-滚轮抽芯机构实现斜支架铸件的斜向抽芯，模具还设有冷却系统。
When the casting is unloaded, side parting and core pulling are required as a circle dovetail groove is around the rope sheave. 摘要绳轮铸件周缘有一圈梯形槽，铸件脱模时需进行侧向分型和抽芯。