您要查找的是不是:
- creep resistant alloy 抗蠕变合金
- The experiment results show that the creep resistant properties of the three dimensional four directional braiding composites are worse than five directional braiding composites. 结果表明,三维四向编织复合材料的蠕变性能低于五向编织复合材料;编织角小的材料抗蠕变性能较好;
- Compared with other superalloys, the alloy 4 with the less lattice misfit possesses the bigger internal frictional stress and activate energy during creep, so has a better creep resistance and longer the rupture lifetime. 与其它合金比较,具有较小晶格错配度的合金4蠕变期间具有最大的内摩擦应力和蠕变激活能,因此,具有较高的蠕变抗力和较长的持久寿命。
- N08800 (Incoloy 800/NS111), N08810 (Incoloy 800H/NS112), N08811 (Incoloy 800HT) are three variants of a nickel-iron-chromium alloy which combines good corrosion and creep resistance. 他们具有较好的耐腐蚀、抗蠕变及高温耐氧化性能。
- A double-phase heat resistant alloy contains proper amount of Cr and Ni and has both austenite and ferrite structure as well as much finer gr ains. 双相耐热合金含有合适的铬、镍含量,具有奥氏体和铁素体双相组织,其晶粒大大细化。
- High-nickel heat and corrosion resistant alloy casting in heat treatment baskets, rails High-chromiumheat and wear resistant castings Alloy steel and spherical graphite cast iron. 热处理炉用耐蚀合金铸件:料盘、料筐,导架等;高铬耐热耐磨铸件:冶金、建材机械用各种耐热磨件;合金钢和球墨铸铁件。
- Adding few palladium in amalgam can impove the amalgam s mercury vapor release rate, mechanical properties, corrosion resistance and creep resistance. 在汞齐合金中添加微量的钯,可改善汞齐合金的汞释出率、机械性质、抗腐蚀性与抗潜变性。
- MPH-L100-TTS also was single layer matrices type. , that values of J, LT, peel adhesion, creep resistance were 31.85u g-cm-2-h"1, 0.30h, 88.23 cN cm"1, 280min. MPH一L100一TTs的透皮稳态流量J=31 .;85 09·cm一2·h一,,时滞LT=0
- VAC/BA/AN/AA Coploymer Emulsion was developed, stability, Water - and Cold -resistance, Adhesive strength and Creep resistance of the Emulsion are discussed. 研制VAC/BA/AN/AA四元共聚乳液,讨论乳液的稳定性、耐水性、耐寒性、粘接强度和抗蠕变性。
- Suitable for a wide range of low and high alloy steels, titanium alloys, austenitic stainless steels, heat resistant alloys, fibre glass reinforced plastics etc. 适合于低合金钢、高合金钢、钛合金、奥氏体不锈钢、耐热合金、玻璃纤维强化塑料等。
- The corrosion resistant alloys(CRAs)for oil and gas industry is carried out to consider the stability of corrosion products. 石油天然气工业的耐蚀合金(CRAs)设计要考虑腐蚀产物的稳定性。
- The proper interpass temperature is required to prevent cold and hot cracking as well as the proper selection of welding filler material, to produce the proper creep resistance and toughness. 需要适当的程间温度和正确选择填充金属材料来防止冷热裂缝,产生适当的蠕变阻力和韧性。
- An integrated casting-rolling process is proposed for producing bimetal strip for friction resistant bush. Two friction resistant alloys proposed are ZnAl4-1RE and AlSi11CuRE. 介绍一种用铸轧一体化方法生产的耐磨轴瓦用双金属带材,并推荐两种耐磨合金:ZnAl4 1RE和AlSi11CuRE。
- An overview of the features of strain resistance alloy for foil strain gauge in property, composition, application and process is introduced. 简述箔式电阻应变计用应变电阻合金的性能要求、种类、应用以及工艺特点。
- Heat resistant alloy steel for boiler 锅炉炉用耐热合金钢
- That pervert again? He give me the creep. 那个色狼又出现了?他让我浑身起鸡皮疙瘩。
- Children learn to creep ere they can go. 孩子要走路,先得学爬行。
- high strength and corrosion resistant alloy 高强度耐腐蚀合金
- The mysterious sound made my flesh creep. 那神秘的声音吓得我毛骨悚然。
- The sight of the snake made her flesh creep. 她看到蛇就汗毛直竖。