您要查找的是不是：
- The performance of plate-fin heat sinks under cross flow cooling has been studied experimentally for various Reynolds numbers, fin heights and fin widths. 在直交流型冷却系统中的平板型散热片的效能已做过许多的实验，包括利用不同的雷诺数、散热片的高度和宽度等。
- Technical data for multi DBHZ series low noise cross flow type cooling tower 组合型DBHZ系列横流式低噪音冷却塔性能参数
- natural draft counter flow cooling tower 自然通风逆流式
- Optimization Design of Thermodynamic Performance of Horizontal Flow Cooling Tower 横流式冷却塔热力性能优化设计
- We also export cooling tower allover the world. 我们真诚希望能与贵公司合作成功，谢谢.
- For example, I inhaled air and circulating water cooling tower. 例如空气吸入口及循环水冷却塔等。
- The engine has hemispherical or cross flow combustion chambers. 该引擎已经半球形或横流燃烧室。
- IAHR 5th Cooling Tower and Spraying pond Symposium,1986. 中国水利水电科学研究院研究报告，1992年4月。
- It has also destroyed the cooling tower at its reactor at Yongbyon. 北韩还炸毁了宁边核反应堆的冷却塔。
- Another cooling tower, chiller, or boiler becomes necessary. 另外冷却塔，制冷机，或锅炉成为必要的。
- RAW WATER: Reservoir filling, filter plant inlet flow control, storage reservoir release, cooling tower fill, flow control stations, etc. 原水：蓄水池加水、过滤设备入流控制、蓄水池放水、冷却塔供水、流量控制站等。
- When there is no impingement, the investigation about flow extravasation effect form film cooling holes is carried out with different cross flow Reynolds Numbers and different density flow ratios of the film outflow to cross flow. 在无冲击射流时，通过改变来流雷诺数、气膜出流与横流密流比，对气膜孔的“溢流效应”进行了研究。
- Based on the structure features of transverse and counter flow type cooling towers,revamping for cooling tower through structure optimization was explored. 从横流式和逆流式冷却塔的结构特点出发,探讨以结构优化方式改造冷却塔的途径。
- A high vacuum composite technique for the production of salt under vacuum was designed,its unit flow,working principle,function of cooling tower and vacuum pump were introduced. 设计了一种用于真空制盐的新型高真空组合技术,介绍了该技术的装置流程、工作原理及凉水塔、真空泵等设备的功能。
- They also said the cooling tower in Yongbyon will be destroyed Friday. 据介绍，宁边核设施冷却塔的爆破工作将于27日进行。
- The mixing performance of cross flow was studied in turbine ejecting mixer with tracing technique. 摘要采用示踪法研究了涡轮喷射混合器内错流射流混合特征。
- Problems of PVC filler cooling tower for circulating water are analyzed. 分析了循环水PVC填料冷却塔的本身问题;
- Fluctuating lift forces are measured for staggered tube bank under two phase cross flow by a strain gauge. 采用电阻应变仪和脉动升力测量装置;在气液两相流横向冲刷三排错列排列的管束时;对其受到的脉动升力做了试验研究.
- Hydrogen chloride burner that designed by mixing cross flow and multiorifice plate were introduced. 介绍了利用横喷射流与多孔板混合模型,选用合适的理论模型设计氯化氢灯头装置。
- Each movement of material is made as simple and short as possible, with no cross flow or backtracking. 设计时，要使材料的每次移动，尽可能简单而距离短，不要有交叉流动或倒流。
