您要查找的是不是：
- The optimizing method of milling tool normal rake based on orthogonal cutting process simulation 基于正交切削模型的铣削加工残余应力预测方法
- cutting process simulation 切削过程仿真
- ODEM is a C++ class library for process simulation. ODEM是一个用于处理模拟的C++类。
- ODEM - ODEM is a C++ class library for process simulation. ODEM是一个用于处理模拟的C++类。
- Onthis basis, by using computer graphics simulation the concise mathematical model is applied to demonstrate the genera-ting cutting process and its result dynamically. 根据所建模型和节曲线为凸的条件,将加工内啮合非圆齿轮的范成过程用计算机进行了动态图形仿真。
- In order to analyze a micro cutting process of abrasive wear by means of molecular dynamics simulation, the principle, model and solving algorithm of molecular dynamics simulation of micro cutting process were discussed. 摘要针对磨粒磨损中微观切削过程，研究了分子动力学模拟的基本原理、磨粒微观切削过程的分子动力学模拟模型和数值模拟势法。
- This cut processing, memory and deferent cost. 这就削减了处理、存储和传送费用。
- Process Simulation, Materials and Energy Balance Establishment and PFD design. 工艺流程模拟，物料与能量平衡的建立，和工艺流程图设计。
- The process simulation of visbreaking unit is introduced in the article. 介绍减粘装置的过程模似。
- Based upon the IBP, a multilayered feed-forward neural network controller is constructed for the position error-compensating control of cutting process, and a simulation control test is done. 基于IBP法,作者构造了一个用于切削过程位置误差补偿控制的多层前馈神经网络控制器,并作了仿真控制试验。
- Numerical simulation model of rock cutting by disc cutter was created by using ANSYS-LS/DYNA and rock cutting process by disc cutter was simulated. 摘要利用ANSYS-LS/DYNA建立盘形滚刀破碎岩石的数值仿真模型，对盘形滚刀破碎岩石进行分析仿真。
- An industrial television camera system is used to monitor and record the cutting process of iceland spar. 利用工业电视摄像系统对冰洲石的切削过程进行观察和记录。
- Based on the artificial neural network (ANN), an ANN model for the abrasive water jet cutting process was proposed. 本文基于人工神经网络理论，建立了水射流加工过程的神经网络模型。
- The tool material and the reasonable cutting parameters were determined in the MLC leaf cutting process. 为此，通过对其切削加工特性的研究和分析，确定了MLC叶片切削加工时的刀具材料和合理的切削参数。
- Module-Integrating Technology in Chemical Process Simulation and Its Application. 化工流程模拟中的模块集成技术及其应用。
- The expert system was suggested to monitor more than one cutting parameter in order to optimize the cutting process. 提出了采用专家系统来监测切割过程中多个参数变化以优化切割过程的方法。
- These display methods have been applied in the BUAA CAST casting process simulation system successfully. 这两种显示方法已在BUAA CAST铸造过程仿真系统中成功地用于显示蜡模或铸件在充型过程中流场物理量数据的信息
- The results show that the optimal parameters in cutting process can reduce cost and improve the efficiency evidently. 实例表明，采用优化后的切削参数进行加工，能明显地降低成本，提高效率。
- The technique is applied to BUAA CAST casting process simulation system successfully. 该技术已成功地应用于BUAA CAST铸造过程仿真系统中 ,用于显示铸件整体的各物理量数据信息。
- The rational choice of the cutter is one of the important ways to improve green cutting process. 刀具的合理选择是提高切削加工的绿色化程度的重要途径之一。
