您要查找的是不是：
- Fracture Failure Analysis of Cylinder Head Bolt 缸盖螺栓断裂失效的分析
- Research of tightening technology for cylinder head bolt 发动机缸盖螺栓拧紧工艺研究
- Cause analysis and solution on breakage of compressor cylinder head bolt 压缩机缸头螺栓断裂原因分析及解决方法
- Study on Strength Check of High Intensity Cylinder Head Bolt of Diesel Engine 柴油机高强度缸盖螺栓强度校核方法研究
- Tightening Torque for the cylinder head bolts is 230 N.m 汽缸盖螺栓的拧紧力矩是230N.;m
- cylinder head bolt and nut 缸盖的螺栓及螺母
- cylinder head bolt 缸盖螺栓
- The cylinder head is heavily finned for strength. 汽缸头附有许多突片以增加强度。
- The deconvolution between cylinder pressure signal and head bolt vibration signal was analyzed. 摘要研究了发动机气缸压力信号与表面振动响应信号之间的反卷积关系；
- This is achieved by using cylinder head gasket. 这通过使用气缸盖衬垫实现。
- Place the engine cylinder head over the dowels. 将引擎汽缸头放在销上。
- Side view of square head bolt with adjustable thread length. 螺纹长度可调整的方头螺栓侧面图。
- Side view of hexagonal head bolt with adjustable thread length. 螺纹长度可调整的六角头螺栓的侧面图。
- Remove control cables from cylinder head cover clip. 从汽缸头盖扣夹上移去控制拉索。
- Grip the sleeve and the piston assembly by the head of the hex head bolt. 用六角头螺栓的头部夹住套筒和活塞总成。
- Clean the exhaust manifold and cylinder head mating surfaces. 清洁排气歧管和汽缸头配合面。
- Cylinder heads heater plugs relay defective. 汽缸盖预热塞继电器故障。
- The main defect of type YC4112Q cylinder head is blowhole. 气孔为YC4112Q气缸盖的主要缺陷。
- We are importer of cylinder head, pls contact with us. 我们求购汽车汽缸盖，请与我们联系。
- Establishment of Torque-angle Tightening Process of Cylinder Head Bolts of Diesel Engine 柴油机气缸盖螺栓扭矩-转角法拧紧工艺的制定
