您要查找的是不是:
- Based on the cold roll forming steel,its characteristic of roll-forming and deforming rule was analyzed. 以冷弯型钢中的槽钢为例,分析了其辊弯成型的特点及变形规律。
- By experiment, we knew the nitriding deformation rule of joint bearing and improved the technology method. 通过实验,掌握关节轴承氮化变形规律,改进了工艺方法,在提高零件精度和质量的同时,降低了生产成本。
- The deformation rule and displacement of inner-hole were also presented, and polynomial fitting was applied to the displacement of inner cavity in a sectional way. 研究了内腔位移分布情况和内孔变形规律,并分段对内孔位移做了多项式曲线拟合;
- His leg was deformed in an accident. 他的腿在一次事故中致畸。
- As the wavelet coefficient is affected by threshold during wavelet decomposition, that is, noise is restrained, the model is closed to the deformation rule and prediction is more exact. 由于在小波分解过程中对小波系数作用于阈值,即对监测过程受到的干扰进行了消除或降低,从而使建立的预测模型更接近于变形体规律,预测更准确。
- Analyzing the deforming rule of the material of turbine blade during the forging process and considering forging procedures, the more reasonable method of machining allowance process was put forward. 从锻造工艺出发,分析了叶片材料在锻造成形过程中变形的规律后,得出更为合理的余量设计的方法,来解决上述的难题。
- She has a deformed foot and can't walk very easily. 她有一只脚畸形,行动不方便。
- The boy has a deformed foot and cannot play games. 那男孩有一只畸形足,不能参加游戏。
- The Ching court began to feel its rule threatened. 清廷开始感到自己的统治受到了威胁。
- But this does not rule out unofficial discussions. 但这并不排除进行非正式的讨论。
- The rule is inapplicable to this occasion. 那规则对这一场合不适用。
- I did the calculation by the rule of three. 我是根据比例运算法则计算出来的。
- It is up to the courts to rule on this matter. 这得靠法院对这事作出裁决。
- I'm afraid that the judge might rule against him. 恐怕法官的判决会于他不利。
- I make it a rule to take a short walk after lunch. 我习惯在午饭后散散步。
- The teacher reiterates that rule. 老师重申了那条规则。
- To deal with these problems,based on the part's deformation rules in SL,the types and deformation characteristics of different layer sections of parts were analyzed. 为此,基于零件光固化成型的变形规律,分析了零件的层片截面类型及其变形特性。
- There is always an exception to any rule. 任何规律总有例外。
- The mold shape is one major factor which affects metal deformation rules,but metal plastic deformation process can be controlled through the change of the mold shape. 模具几何形状是影响金属塑性流动的主要因素之一,通过改变模具的几何形状可以改变金属的塑性流动。
- This rule cannot be applied to every case. 这项规则不是所有情况都使用。