您要查找的是不是:
- design load factor 设计荷载系数
- The load factor of the hashtable. 哈希表的加载因子。
- Returns the current maximum load factor. 返回当前的最大负载因子。
- When a task is enqueued, the load factor is increased. 任务排队时,加载因子将增加。
- A load factor of 1.0 Is the best balance between speed and size. 加载因子1.;0是速度和大小之间的最佳平衡。
- The load factor is the maximum ratio of elements to buckets. 加载因子是元素与存储桶的最大比率。
- By the method of Computer Aided Geometrical Design(CAGD),with computer graphics technology,the curves of load factor for tray tower are scanned into raster presentation. 采用计算机辅助几何设计的方法(CAGD法),对史密斯关联图进行计算机精确描绘。
- The hotel business has its own load factor in the form of the occupancy rate. 旅馆业本身的荷载系数由开房率来表示。
- Based on the design load and internal force employed the content of load test is ascertained. 模型的加载测试内容按照原型桥梁设计荷载及使用内力来确定.
- Accepted design loadings in the United States vary with the latitude. 在美国被采用的设计负荷随着纬度而变化。
- A column's ability to run at rates lower than its full design load is called turndown. 从这里看不像是最低可调负荷啊,只是低于设计负荷。
- Simulation results reveal the well-behaved flow field at design load and the bad-behaved flow field which results in low efficiency at off-design load. 泵在设计工况有着良好的流动性能,在非设计工况出现了不良流动现象,影响了泵的效率。
- Pipe top's changing load of oil &gas pipelines with common diameter is calculated by ways of different methods in light of design load of road culvert. 根据公路桥涵的设计荷载,采用不同的方法,计算出常用直径的油气管道的管顶活载。
- Motley: I don't like guessing. Did you pull a load factor of 50% out of your butt? Where did that come from? motley: 我不喜欢猜测。你难道是从屁股里面把那个负荷指标标给拉出来的?这个究竟从哪里来的?
- Load Factor The load factor is the ratio of the average load to the generator set power rating. 负荷系数负荷系数指的是机组的平均负荷与额定功率之间的比率。
- A smaller load factor means faster lookup at the cost of increased memory consumption. 较小的加载因子意味着以消耗更大内存为代价的更快查找。
- A comparison of two calculation methods, overtone law simplified computation and simulation by DEST, has made in this paper when calculating the design load. 对比了同一房间采用谐波法简化计算与DeST模拟两种方法进行设计日空调负荷计算。
- Constructs a new, empty hashtable with the specified initial capacity and the specified load factor. 构建一个新的指定初始容量和装载因子的空哈希表。
- Through the simulation of the evaluated operation conditions it is concluded that the fractionator has exceeded the design load and is nearing to the limit load. 通过对标定工况模拟得出结论:分馏塔负荷已超过设计负荷接近极限负荷,塔顶冷凝系统及回流泵已达到极限负荷。
- Class using the default initial capacity and load factor, and the specified hash code provider and comparer. 使用默认初始容量、默认加载因子、指定的哈希代码提供程序和指定的比较器来初始化。