您要查找的是不是：
- diameter of anchor bolt hole 地脚螺栓孔直径
- Note: 1.Size-Nominal diameter of the valve; D1-Diameter of the flange bolt hole center circle; D-Diameter of the flange bolt holes. 注:1.;规格尺寸为阀门通径尺寸;D1为阀门法兰孔中心分布圆尺寸;D为法兰孔直径。
- Anchor drilling machine also effects rapidity of anchor bolt support. 锚杆钻机又直接影响到锚杆支护的速度。
- The influence of anchor bolt supports on seismic responses of strengthening grottoes is studied with the engineering soft ADINA. 摘要利用大型通用ADINA有限元分析软件进行动力分析，研究锚杆加固对石窟地震反应的影响。
- Through analyzing the coupling structure of anchor bolt in an item,we find the unfit coupling structure doing harm to the threaded coupling.It has a sense of reference. 通过对项目施工中遇到的一种地脚螺栓连接结构的分析,发现不恰当的连接结构设计对螺纹连接的不利影响,对工程有一定借鉴意义。
- Calculation of Anchor Bolt Circle Diameter for Type A and Type AN Support Legs A型、AN型腿式支座地脚螺栓中心圆直径的计算
- The interior diameter of a hole,tube,or cylinder. 内径洞、管或圆柱体的内径
- The interior diameter of a hole, tube, or cylinder. 内径洞、管或圆柱体的内径
- The diameter of the tree-trunk is about 2 meters. 这树干的直径大约是2米。
- The pullout resistance of anchor bolt is a very important technical parameter for anchoring engineering, which is related to the safety of anchoring system. 摘要锚杆的抗拔力在锚固工程中是至关重要的技术参数，关系到锚固体系的安全。
- Measure the diameter of this circle. 量一下这圆的直径。
- Design of Anchor Bolt and Base Plate of High Column 高塔地脚螺栓和基础环的设计
- We must gauge the diameter of wire first. 我们必须先测量电线的直径。
- Breakdown Analysis of Anchor Bolt for Tower Crane 塔机地脚螺栓折断原因分析
- The holes of anchor bolts will be grouted with normal( Portland, non-shrinkage) cement mortar. 这些地脚螺孔将灌入普通（特兰，无收缩）泥砂浆。
- The holes of anchor bolts will be grouted with normal (Portland, non-shrinkage) cement mortar. 这些地脚螺孔将灌入普通(波特兰,无收缩)水泥砂浆。
- The holes of anchor bolts will be grouted with normal (Portland ,non-shrinkage) cement mortar. 这些地脚螺孔将灌入普通（波特兰，无收缩）水泥砂浆。
- Results It was good for stress distribution of the bone tissues around the implant and for reduction of probability of bone resorption to augment the diameter of anchored implant. 结果支抗种植体直径的增大有利于种植体周围骨组织应力的分布，减少骨吸收发生的概率。
- The holes of anchor bolts will be grouted with normal （Portland ，non-shrinkage） cement mortar. 这些地脚螺孔将灌入普通（波特兰，无收缩）水泥砂浆。
- Bolt hole fitting plastic core industrial caster. 孔顶塑芯工业脚轮。
