您要查找的是不是：
- die parting surface 分模面
- The processing of throttle,the determination of parting surface and ingate position and the selection of die casting machine were paid attention to. 内浇道位置选取在法兰的侧面,这样金属液先填充主浇道,内部质量较好。模具设计两个侧型和一个抽芯,对浇口道,分流锥和高温热节区域采用点冷或循环水冷却方式。
- The mold cavity was obtained by splitting mold base in parting surface. 模具型腔可采用分型面分割模板的方法获取。
- Surface peening technology of die part 模具的表面强化技术
- Through discussion,the method and steps of computer aided parting surface design of a mould CAD/CAM are obtained. 得出了在模具CAD／CAM过程中实现计算机辅助分模面设计的方法和步骤。
- The part surface treated by the plasma CVD technolgy has high resistances of heat oxidation, corrosion and wear. 经等离子CVD技术处理后的零件表面,具有耐热、耐氧化、耐腐蚀和耐磨损等特点。
- The hexagonal runner is basically a double trapezoidal runner, where the two halves of the trapezium meet at the parting surface. 可是，方形的流道由于另一个原因，也不能另人满意：就是顶出困难。
- The optimization parting direction was determined after all undercut features were distinguished, and the parting line and parting surface were confirmed accordingly. 通过侧凹特征的判别确定模具的优化脱模方向，并确定模具的分型线和分型面。
- Using flexible interpolator pad is an important way to suppress the part surface defect in stretch-farming process on multi-paint tool. 摘要采用柔性垫层是抑制和消除多点模拉形过程中零件表面缺陷的重要措施。
- Using flexible interpolator pad is an important way to suppress the part surface defect in stretch-forming process on multi-point tool. 采用柔性垫层是抑制和消除多点模拉形过程中零件表面缺陷的重要措施。
- The quick phosphatizing method of cold extruding die parts and its defects, as well as the solving methods are introduced respectively. 介绍了冷挤压模具零件的快速磷化方法及其缺陷分析与改进措施。
- Coating has obvious effects on the carburization and ripples of parts surface. 涂料直接影响铸件表面积碳及皱皮倾向;
- Laser printer leave permanent mark on the part surface with heat effect of laser ablated.But no matter pneumatic printer or laser their control system are similar. 激光标记机是利用激光的热效应烧蚀掉物体表面材料从而留下永久标记的技术。
- They say the dying part's not so bad; but then, we haven't got much firsthand testimony. 据说临死的时候并没有那么糟糕；不过那种时候，我们没有多少第一手的证据支持这一点。
- The detection theory of parts surface disfigurement based on the embed image processing system is introduced. 介绍了嵌入式图像处理系统用于零件表面缺陷检测的原理。
- By process analysis to insulated shell parts,die structure is designed,die structural characters and wording process are introduced,and some die parts design are explained as well. 通过对绝缘外壳零件的工艺分析,完成了模具结构设计,介绍了模具的结构特点和模具工作过程,并对模具部分零件设计作了说明。
- It's sad that we have to part company with them. 很遗憾我们要与他们分别了。
- The die of flexible deforming parts is introduced, the technology improvement is completed to convex and concave die of main die parts in order to guarantee the reasonable small gap. 介绍了易变形零件的模具,为了保证合理的间隙,对主要模具零件的凸凹模进行工艺改进。
- Parting surface was designed in terms of the shape, dimension of the parts and requirements of gating system and die-released. 根据压铸件的形状、尺寸,以及浇注系统和脱模等要求,设计分型面。
- Every winter some old people die from hypothermia. 每年冬天都有些老人死于体温过低。
