该词条未找到_海词词典

您要查找的是不是：

Der Winter kommt ohne Mitteilung, die Temperatur steigt sich ohne Anzeige ab. 我先起个头：冬天说来就来，气温说降就降。
Die temperature has great effects on the cell structure and foam properties. 机头发泡口模温度对发泡体结构和性能有关键性影响。
The relation between extrudate density and screw speed,die temperature is also discussed. 还揭示了口模温度和螺杆转速与制品密度的关系。
There can be some trade off between die temperature, cavity filling time and the temperature of the molten metal. 在压铸模温度、模腔充填时间和金属熔化温度之间可能要做某些权衡。
And with the increase of the die temperature, the size and ordering degree of crystal increase along, a,b,c axle and the crystallinity increase. 口模温度提高，晶粒沿a，b，c轴的尺寸均增大，有序性和结晶度提高。
The influence of vibration field to apparent viscosity inceased when the die temperature was above the melt point of HDPE. 口模温度超过熔点时,振动场对表观粘度的影响有所增大;
During extrusion of PP, die pressure and apparent viscosity prominently decrease, and die temperature increase with ultrasonic treatment. 超声辐照使PP挤出过程中的口模压力、表观粘度显著下降，熔体指数增大，提高挤出产量达100%25。超声挤出PP口模温升达10℃以上，降低了挤出物的出口膨胀率，挤出物表观质量有所提高。
Neural network method was used to investigate the parison swell affected by the die temperature and extrusion flow rate. 采用神经网络方法预测了受模口温度和挤出流率影响的型坯成型阶段的膨胀。
WPP/GRT/WSF composites were prepared by reaction extrusion process. The effects of screw rate and die temperature on mechanical properties of the composites were discussed. 采用反应挤出方法制备了废聚丙烯 /废轮胎胶粉 /废尼龙短纤维 (WPP/GRT/WSF)复合材料 ,讨论了螺杆转速、机头温度对WPP/GRT/WSF复合材料力学性能的影响。
WPP/GRT/WSF composites were prepared by reaction extrusion process.The effects of screw rate and die temperature on mechanical properties of the composites were discussed. 采用反应挤出方法制备了废聚丙烯/废轮胎胶粉/废尼龙短纤维(WPP/GRT/WSF)复合材料,讨论了螺杆转速、机头温度对WPP/GRT/WSF复合材料力学性能的影响。
The effects of powder temperature, die temperature, lubricant content and compacting pressure on the behavior of warm compaction at lower temperature were studied. 较系统地研究了低温温压工艺,考察了粉末温度、模具温度、润滑剂含量和压制压力对温压密度的影响。
The observed results of effects of viscosity ratio, die temperature, channel geometries on coextrusionare introduced in this paper. Meanwhile, the reasons resulting in tile effects are also analysed. 本文介绍了共挤物料的粘度比、模具温度和流道几何形状几个因素对共挤出的影响规律的实验观察结果，并对其产生原因进行了分析。
Die temperatures and thermal stresses can have significantly influence the efficiency,reliability,and late time of light emitting diodes(LED). 发光二极管(LED)的结点温度和应力分布对它的发光效率、可靠性和寿命有着至关重要的影响。
A small adjustment will equalize the temperature in the two rooms. 稍作些调节就会使两间房内的温度相等。
Every winter some old people die from hypothermia. 每年冬天都有些老人死于体温过低。
The effects of powder temperature, die temperature, lubricant content and compacting pressure on the behavior of warm compaction of iron based alloy powders at lower temperatures were studied. 对铁基合金粉末低温温压工艺进行了较为系统的研究,考察了粉末温度、模具温度、润滑剂含量和压制压力对温压密度的影响。
There is an imperceptible change in temperature. 温度有细微的变化。
Little does he care whether we live or die. 他一点也不管我们是死是活。
The food should be kept at low temperature. 这种食品应低温保存。
Nowadays many people die of cancer. 现在有很多人死于癌症。