您要查找的是不是:
- Once the video has been deinterlaced, a scan-rate conversion process may be necessary, in order to insure that the input frame rate matches the output display refresh rate. 一旦视频完成了去隔行化,就有必要进行扫描速率的转换,以确保输入的帧速率与输出显示的刷新速率相匹配。
- display refresh rate 显示刷新速率
- The value entered for the refresh rate is invalid. 输入的刷新率数值无效。
- Refresh rate value must be between 40 and 120. 刷新率数值必须介于40和120之间。
- Maximum refresh rate of the video controller in Hertz. 该视频控制器的以赫兹表示的最大刷新速率。
- Windows chooses the best display settings, including screen resolution, refresh rate, and color, based on your monitor. Windows根据监视器选择最佳的显示设置,包括屏幕分辨率、刷新频率和颜色。
- "Minimum refresh rate of the video controller in Hertz. "该视频控制器的以赫兹表示的最小刷新速率。
- Another consideration in getting the best possible display from your monitor is the screen refresh rate. 获得监视器的可能最佳显示效果的另一个注意事项是屏幕刷新频率。
- Fixed a bug that was causing the HUD to not display unless the refresh rate was 0. 固定的一个错误,这是造成住房和城市发展部,以不显示,除非刷新率为0。
- One buffer points to the present video frame, which is sent to the display at a certain refresh rate. 一个缓冲器区指向目前的视频帧,该帧被以一定的刷新速率送到显示器上。
- The bottom section displays refresh data messages. 底部显示刷新数据消息。
- The refresh rate must be greater than or equal to 1. 刷新率必须大于或等于1。
- You should select a refresh rate of at least 75 Hertz. 应该选择最少75赫兹的刷新频率。
- Addresses some issues with Vsync and refresh rate problems. 修正某些垂直同步与萤幕更新率的问题。
- In computer graphics, an undesirable pulsation of a display image on a cathode ray tube that usually occurs when the refresh rate is low. 在计算机制图技术中,阴极射线管显示图象中不希望出现的波动,通常在刷新率较低时出现。
- Note: for typical displays, flicker occurs at a refresh rate of40 Hz or less. 注:典型的显示器出现闪烁现象是在刷新率为40赫兹或更低时。
- Select the highest or higher screan refresh rate to protect your eye. 选监视器卡片,选择最高或较高的屏幕刷新频率已保护你的眼睛。
- display refresher rate 显示更新速度
- Refresh rate is set by default to the lowest available within the Configuration Tool. 使用设置工具可以设置默认刷新速率。
- For more information, see Change screen resolution and Correct monitor flicker (refresh rate). 有关详细信息,请参阅更改屏幕分辨率和正确的监视器闪烁(刷新率)。