您要查找的是不是：
- Design of anchored double row pile and its application to landslide correction 锚碇式双排桩治理滑坡的设计与应用
- A SIMPLIFIED COMPUTING METHOD OF THE FIRST KIND DOUBLE ROW PILE RETAINING STRUCTURE 一类双排桩支护结构的简化计算方法
- double row pile 双排桩
- Pierced rollers and one double row pin-type cage of steel. 穿孔滚子和一个双列针型钢保持架。
- Bearing with two double row inner rings with roller and cage assemblies. 带双列内圈的轴承,内圈带滚子和保持架组件。
- Wrist pin end carried on double row long cylindrical roller bearing. 连杆小端装有双列长圆柱滚子轴承。
- The axial internal clearance of the double row bearings is at least 0,5 mm. 双列轴承的轴向内部游隙为至少0,5毫米。
- double row piles 双排桩
- portal double row anti-slide pile 双排门式抗滑桩
- Bearing with two single row inner rings and one double row inner ring with roller and cage assemblies. 带两个单列内圈和一个双列内圈的轴承,内圈带滚子和保持架组件。
- Two double row inner rings with roller and cage assemblies; the inner rings are extended at one side. 两个带滚子和保持架组件的双列内圈;内圈在一侧延长。
- All planet gears are mounted on a double row spherical and a single row cylindrical roller bearings. 所有行星齿都安装在一个双排球面和一个单排圆柱滚轴上。
- Self aligning double row spherical roller bearing allows for a higher degree of angular deflection of the drive shaft. 自对正式双列球面滚动轴承允许驱动轴有更高的偏转角度。
- Bearing with two single row inner rings and one double row inner ring with tapered bore (taper 1:12 or 1:30) with roller and cage assemblies. 带两个单列内圈和一个双列内圈的轴承,内圈带锥形孔(锥度1:12或1:30)、滚子和保持架组件。
- Bearings of the TDO configuration have one double row outer ring, or cup, and two inner rings with roller and cage assembly, or cones (fig 1). TDO配置的轴承有一个双列外圈或称圆锥外圈和两个带滚子与保持架组件的内圈或称圆锥内圈(图1)。
- supporting structure in the row pile 排桩内支撑支护结构
- SKF produces double row tapered roller bearings of the TDI configuration mainly in the designs described in the following. SKF主要按下面说明的设计生产TDI配置的双列圆锥滚子轴承。
- The construction of the foundation by means of rowed pile ground freezing method effectively resolves the problem of the foundation pit lagging and water repellence. 润扬长江公路大桥南锚碇基础,为软土地基、嵌岩特大深基坑工程,采用排桩冻结法施工,有效地解决了基坑支护、封水问题。
- Single and double row full complement bearings (without cage) complete the SKF standard assortment for general engineering. 加上单列和双列满滚子轴承(不带保持架),构成SKF用于通用工程的轴承品种标准配套。
- The TDI configuration (fig 2) which comprises one double row inner ring with two roller and cage assemblies and two outer rings. TDI配置(图2),包括一个带有两个滚子与保持架组件的双列内圈和两个外圈。
