您要查找的是不是：
- Double - row anti - sliding piles 双排抗滑桩
- Forcing Distribution of Buried Double Row Anti- slid Piles 全埋式双排抗滑桩的受力分布
- Keywords Silt squeezing methed;Anti sliding pile;Thick silt ground;Concretion draining; 挤淤法;抗滑桩;厚淤泥地基;加载预压;固结排水;
- Pierced rollers and one double row pin-type cage of steel. 穿孔滚子和一个双列针型钢保持架。
- Application of supporting system of combination of anchorage chain, anchorage rod frame girder and anti sliding pile in the treatment of landslide of big slope of roadbed 锚索、锚杆框架梁和抗滑桩联合支护体系在路基高边坡滑坡治理中的应用
- Bearing with two double row inner rings with roller and cage assemblies. 带双列内圈的轴承,内圈带滚子和保持架组件。
- combination anti slid pile 组合抗滑桩
- Wrist pin end carried on double row long cylindrical roller bearing. 连杆小端装有双列长圆柱滚子轴承。
- The axial internal clearance of the double row bearings is at least 0,5 mm. 双列轴承的轴向内部游隙为至少0,5毫米。
- RPS accomplish the optimization of resistance slide pile parameter and the result of design treating with computer. RPS系统实现了抗滑桩设计参数的优化及设计成果的计算机处理。
- Bearing with two single row inner rings and one double row inner ring with roller and cage assemblies. 带两个单列内圈和一个双列内圈的轴承,内圈带滚子和保持架组件。
- Two double row inner rings with roller and cage assemblies; the inner rings are extended at one side. 两个带滚子和保持架组件的双列内圈;内圈在一侧延长。
- All planet gears are mounted on a double row spherical and a single row cylindrical roller bearings. 所有行星齿都安装在一个双排球面和一个单排圆柱滚轴上。
- Self aligning double row spherical roller bearing allows for a higher degree of angular deflection of the drive shaft. 自对正式双列球面滚动轴承允许驱动轴有更高的偏转角度。
- Bearing with two single row inner rings and one double row inner ring with tapered bore (taper 1:12 or 1:30) with roller and cage assemblies. 带两个单列内圈和一个双列内圈的轴承,内圈带锥形孔(锥度1:12或1:30)、滚子和保持架组件。
- The Application of Anti - slide Piles in High Wing Wall Slope on Soft Soil Foundation 软土地基上高翼墙边坡中抗滑桩的应用
- Bearings of the TDO configuration have one double row outer ring, or cup, and two inner rings with roller and cage assembly, or cones (fig 1). TDO配置的轴承有一个双列外圈或称圆锥外圈和两个带滚子与保持架组件的内圈或称圆锥内圈(图1)。
- SKF produces double row tapered roller bearings of the TDI configuration mainly in the designs described in the following. SKF主要按下面说明的设计生产TDI配置的双列圆锥滚子轴承。
- Single and double row full complement bearings (without cage) complete the SKF standard assortment for general engineering. 加上单列和双列满滚子轴承(不带保持架),构成SKF用于通用工程的轴承品种标准配套。
- The TDI configuration (fig 2) which comprises one double row inner ring with two roller and cage assemblies and two outer rings. TDI配置(图2),包括一个带有两个滚子与保持架组件的双列内圈和两个外圈。
