您要查找的是不是：
- The axial internal clearance of the double row bearings is at least 0,5 mm. 双列轴承的轴向内部游隙为至少0,5毫米。
- Four pionts angle contact ball bearing is separable bearing,it can be subject to bi-directional load and have the function of both single row and double rows bearings. 四点接触球轴承为可分离型轴承，可承受双向轴向载荷，并有单列和双列角接触球轴承的功能。
- Dynamic Control Grinding for Double Row Bearing Rings 双滚道轴承套圈动态控制磨削
- double row bearing 双列轴承
- Bearing with two double row inner rings with roller and cage assemblies. 带双列内圈的轴承,内圈带滚子和保持架组件。
- Wrist pin end carried on double row long cylindrical roller bearing. 连杆小端装有双列长圆柱滚子轴承。
- Bearing with two single row inner rings and one double row inner ring with roller and cage assemblies. 带两个单列内圈和一个双列内圈的轴承,内圈带滚子和保持架组件。
- Pierced rollers and one double row pin-type cage of steel. 穿孔滚子和一个双列针型钢保持架。
- Insert ball bearing unit is consisted of a double sealed, single row bearing and one of various types of housings (cast iron or stamping steel housing). 带座外球面球轴承由一个双面密封且外圈具有球形外截面的宽内圈深沟球轴承和一个轴承座(铸铁座或钢板冲压座)两部分组成。
- Self aligning double row spherical roller bearing allows for a higher degree of angular deflection of the drive shaft. 自对正式双列球面滚动轴承允许驱动轴有更高的偏转角度。
- The majority are single row bearings with a cage. 其中大部分是带有一个保持架的单列轴承。
- Bearing with two single row inner rings and one double row inner ring with tapered bore (taper 1:12 or 1:30) with roller and cage assemblies. 带两个单列内圈和一个双列内圈的轴承,内圈带锥形孔(锥度1:12或1:30)、滚子和保持架组件。
- The boundary dimensions of SKF double row angular contact ball bearings are in accordance with ISO 15:1998, except for the width of bearing 3200 A. SKF双列角接触球轴承的外形尺寸符合ISO 15:1998标准,轴承3200A的宽度除外。
- Any angular misalignment of the outer ring relative to the inner ring of double row full complement cylindrical roller bearings produces moment loads in the bearing. 双列满滚子圆柱滚子轴承的外圈相对于内圈的任何角位移都会在轴承中产生力矩载荷。
- Two double row inner rings with roller and cage assemblies; the inner rings are extended at one side. 两个带滚子和保持架组件的双列内圈;内圈在一侧延长。
- All planet gears are mounted on a double row spherical and a single row cylindrical roller bearings. 所有行星齿都安装在一个双排球面和一个单排圆柱滚轴上。
- Bearings of the TDO configuration have one double row outer ring, or cup, and two inner rings with roller and cage assembly, or cones (fig 1). TDO配置的轴承有一个双列外圈或称圆锥外圈和两个带滚子与保持架组件的内圈或称圆锥内圈(图1)。
- SKF produces double row tapered roller bearings of the TDI configuration mainly in the designs described in the following. SKF主要按下面说明的设计生产TDI配置的双列圆锥滚子轴承。
- Single and double row full complement bearings (without cage) complete the SKF standard assortment for general engineering. 加上单列和双列满滚子轴承(不带保持架),构成SKF用于通用工程的轴承品种标准配套。
- The TDI configuration (fig 2) which comprises one double row inner ring with two roller and cage assemblies and two outer rings. TDI配置(图2),包括一个带有两个滚子与保持架组件的双列内圈和两个外圈。
