您要查找的是不是：
- drive pinion cone bearing cup 传动小齿轮锥形轴承杯
- drive pinion cone bearing 主动小齿轮锥形轴承
- Refer to Drive Pinion Bearing Pre-Load Adjustment. 参阅驱动小齿轮轴承预荷调整。
- differential cone bearing cup 差速器锥形轴承杯
- Worn teeth on ring gear or drive pinion gear. 环形齿轮或驱动小齿轮上齿磨损。
- End play in drive pinion bearings. 驱动小齿轮轴承的端隙。
- Remove the depth shims from rear pinion bearing cup bore in axle housinRecord the thickness of the depth shims. 从轴管里的后小齿轮轴承盖孔拆卸限深垫片。记录限深垫片厚度。
- differential drive pinion bearing cage 差速器主动小齿轮轴承罩
- differential drive pinion cage bearing 差速器主小齿轮轴承罩
- The drive pinion is beveled at 45 degrees and engages the ring gear, which is also beveled at 45 degrees, causing the ring gear to revolve at 90 degrees to the drive shaft. 该驱动器齿轮是斜45度和参与的齿圈，这也是斜角在45摄氏度，造成齿圈旋转90度的传动轴。
- differential drive pinion bearing 差速器主动小齿轮轴承
- differential drive pinion bearing lock 差速器主动齿轮轴承锁
- The ring gear is attached to the differential case so that the ease rotates with the ring gear when the latter is driven by the drive pinion. 冠状齿轮与差速器壳相连,这样当冠状齿轮由传动齿轮驱动转动时,差速器壳也转动。
- An over-running clutch on the drive pinion prevents the starter from being driven by the engine once it starts. 在驱动小齿轮上的一个超转离合器可避免启动马达被引擎带动，一旦引擎启动了。
- Cold Extrusion of Cone Bearing Outer Race 圆锥轴承套圈冷挤压
- The driving power enters the differential through the drive pinion on the end of the propeller shaft. The drive pinion is meshed with a large ring gear so that the ring gear revolves with the pinion. 也就是说,驱动力是从传动轴末端的传动齿轮输送到差速器的。传动齿轮与一个很大的冠状齿轮啮合,传动齿轮驱动冠状齿轮。
- axle drive pinion adjusting sleeve 车轴传动小齿轮调整套
- bearing cup with ball bearings in ball race 滚道中带滚珠的轴承环
- The boy gobbled up an ice-cream cone. 那个男孩大口大口地吃完了一个蛋卷冰淇淋。
- cup and cone bearing 钢碗滚锥式轴承
