您要查找的是不是：
- Study on FM-110 Dry Film Lubricating Material FM-110干膜润滑材料之研究
- dry film lubrication 干膜润滑
- Approved and tested lubrication methods include lithium stearate grease, MOS2 dry film, most oils, greases and moly pastes. 核定和测试润滑方法包括硬脂酸锂润滑脂，二硫化钼干片，大多数油，油脂和钼膏。
- Dry film thickness measured on a smooth test panel. 干膜厚度应在平滑的样板上测量。
- The thin, dry film formed by such a mixture when applied to a surface. 已干油漆层用于表面时这种混合物薄而干的膜
- Adhesion of Dry Solid Film Lubricants, Method of Test for (05. 干式固体薄膜润滑剂的粘合性的试验方法(05。
- Part to have a non-sticky dry film rust preventative. 分开时不要有粘而干的锈覆盖物。
- Thin film lubrication (TFL) has been a research hot spot in recent years,which leaves many black areas to tribologists. 利用考虑微结构与微旋效应的微极流体理论来研究薄膜润滑的特性。
- The results indicate that the bearing can construct full oil film lubrication and the dynamic pressure effect improves the bear... 结果表明，该支承可以建立起全膜润滑，动压效应的存在提高了支承的承载能力。
- The thin,dry film formed by such a mixture when applied to a surface. 已干油漆层用于表面时这种混合物薄而干的膜
- Results have shown that the effect of viscosity of global diamond nanoparticles gives rise to thicker film in thin film lubrication regime. 试验结果表明：在薄膜润滑区，球型纳米金刚石颗粒的增粘作用，使混合油油膜增厚；
- dry film lubricant 干燥膜润滑剂
- Corrosion Characteristics of Dry Sold Film Lubricants, Method for Determining (05. 干性固体薄膜润滑剂的耐腐蚀特性的测定方法(05。
- Thermal Shock Sensitivity of Dry Solid Film Lubricants, Methods of Test for (05. 干式固体薄膜润滑剂的热冲击敏感性的试验方法(05。
- Furthermore, a poorly dispersed system results inferior mechanical properties of the dry film. 而且,差的分散体系导致干膜的机械性能变差。
- The parylene anchor with very deep semi sphere recess is fabricated utilizing the dry film photolithography technique. 聚对二甲基苯固定器拥有一个非常深的半圆形沟槽，这是运用乾式薄膜光阻的技术制作而成。
- "For dry film lamination, is the temperature of the lamination roller checked and verified using an infrared meter? 对干膜压膜，是否有对压膜滚轮温度进行检验并对红外线表表进行确认？"
- Relationship between viscosity, velocity or pressure and failure of lubricating oil under thim film lubrication were expounded. 模拟出分子膜的固液转变、界面滑移等现象。研究了纳米薄膜材料在空间和国家安全领域获得应用。
- However, its use is not recommended in dry films thinner than 1 mil (25um). 但是它不被推荐到稀释剂干膜层低于1 千分之一寸（25微米）的材料上。
- Objective: To test and analyze density of medical dry film varying with temperature. 目的:测试与分析医用干式胶片密度随温度的变化。
