您要查找的是不是:
- Familiar with epoxy adhesive products and market, has related sales experience. 熟悉环氧类胶粘剂产品及市场,具备行业销售经验。
- Epoxy adhesive in stick form for repairing broken items or patching leaks. 用于修补容器,管道等的破损;
- The specimens were made from two glass arms joined with a 0.005-in. layer of epoxy adhesive. 制作的试样是把两块玻璃臂用0.;005时厚环氧粘合剂涂层胶合成的。
- All the robs are glued together by instant glue first and then by epoxy adhesive. 所有失去了粘在一起,是透过即时胶水第一,然后由环氧胶粘剂。
- The reason for reduction of bonding performance of epoxy bonded joint was the degradation of epoxy adhesive. 胶粘剂分子链的降解是环氧胶接接头胶接性能降低的主要原因;
- Under the high-speed work condition, the brittleness of epoxy adhesive coating leads to its bad slurry erosion performance. 但由于环氧树脂胶粘层脆性大,在较高速度的浆体冲蚀工况下,其抗浆体冲蚀磨损性能并不理想。
- New product of epoxy resin,curing agent,addtive and developing progress in epoxy adhesive,coating and comosite for airliner were introduced. 介绍了环氧树脂、固化剂及助剂方面的新产品以及新型环氧树脂胶粘剂、涂料、大飞机用复合材料等的开发进展。
- However, when dicyandiamide and imidazole were added together in epoxy adhesive, the amount of dicyandiamide decreased to 15%. 而复合使用改性双氮胺和咪唑,在保证性能和固化时间的前提下,双氰胺的用量可减少至15%25。
- The reason of the failure of epoxy bonded joint in water was that the epoxy adhesive on the metal surface was substituted for water. 环氧胶接接头在水中破坏失效的原因主要是渗入到胶接层的水分子取代了胶粘水分子在金属表面的粘附。
- According to the analysis of wearing curve by tests and wear topography by SEM, slurry erosion wear mechanism of modified epoxy adhesive coating was discussed. 浆体冲蚀磨损机制的分析讨论是结合磨损试验获得各种情况下的磨损曲线与扫描电镜观察到的磨损形貌进行分析的。
- The new sensitive material of rotary screen was prepared with diazo-colophony photosensitizer and polyethylene alcohol、epoxy adhesive 、delitescent solidified agent. 本文用重氮树脂光敏剂与聚乙烯醇、粘合剂、潜伏性固化剂配伍,研制成新型圆网感光材料。
- In this paper, the effect of talcum powder and nm-montmorillonite(MMT) as fillers on the tensile shear strength of under water epoxy adhesive was reseached. 主要研究了滑石粉、有机化处理蒙脱土作为填料对水下环氧胶粘剂拉伸剪切强度的影响及蒙脱土与滑石粉协同作用效果,依此推荐了水下环氧胶粘剂的组份。
- The treated dicyandiamide have a better compatibility with epoxy adhesive, which contribute to improving the mechanical properties of curing epoxy adhesive greatly. 改性双氰胺与环氧树脂具有较好的相容性,使环氧树脂固化体系的力学性能具有较大幅度的提高。
- The new sensitive material of rotary screen was prepared with diazo-colophony photosensitizer and polyethylene alcohol、 epoxy adhesive、 delitescent solidified agent. 本文用重氮树脂光敏剂与聚乙烯醇、合剂、伏性固化剂配伍,研制成新型圆网感光材料。
- Two siloxane epoxy curing agents were synthesized, and the effects of the products on the adhesive strength, refractive index and transparence of epoxy adhesive were studied. 合成了两种硅氧烷环氧固化剂,并研究了它们对环氧树脂胶粘剂的粘接强度、折射率、透光性等方面的影响。
- This epoxy adhesive mixed with the accelerant has advantages of short solidifying time, little dielectric loss, strong adhesive stress at high temperature, and good insulation performance, etc. 用该促进剂配制的环氧胶粘剂具有凝胶时间短、介电损耗小、高温粘结力强、绝缘性能好等特点。
- In this experiment nano- and macro-filler were added into epoxy adhesive to increase the relative abrasion resistance (RAR) of epoxy coating and function of the filler effecting on epoxy adhesive coating . 为了提高环氧粘涂层的耐磨性,本试验通过在环氧胶粘剂中加入纳、微米填料,研究了纳微米填料对环氧胶粘剂涂层耐磨性的影响规律。
- When being filled with composite of nano- and macro-filler the RAR of coating was as 2.57 times as that of 45 steel and 2.85 times higher than that of the pure epoxy adhesive coating. Which was also higher than that of coating with nano-filler. 加入纳微米复合填料其相对耐磨性为正火态45钢的2.;57倍;和纯环氧胶粘剂涂层相比;提高幅度可达2
- Aminopolysiloxane and carboxy terminal butadiene-acrylonitrile (CTBN) were used to modify the epoxy resin system, and the heat-resistant epoxy adhesive cured at room temperature was prepared. 采用氨基硅油和液体端羧基丁腈橡胶(CTBN)对环氧树脂进行化学改性,制备出室温固化耐热环氧胶粘剂。
- The effects of toughener and filler on shearing strength and impact strength of epoxy adhesives were studied. 研究增韧剂、填料对环氧树脂胶粘剂剪切强度和冲击强度性能的影响。