您要查找的是不是:
- Studies of the modification of bismaleimide (BMI)/diaminodiphenylether (DDE) blend system by means of epoxy resin, epoxy acrylic ester and diallyl phthalate were made in this paper. 本文介绍了环氧树脂、环氧丙烯酸酯、邻苯二甲酸二烯丙基酯对双马来酰亚胺(BMI)/二氨基二苯醚(DDE)体系改性的研究工作.
- Through vulcanization curves evaluation ammonium benzoate was selected as the vulcanizing agent of epoxy acrylate rubber (EACM). 通过硫化曲线评定,选用苯甲酸铵作硫化剂对环氧型丙烯酸酯橡胶低温胶进行硫化。
- Adipic acid modified epoxy acrylate pigment wetting and dispersing agent is synthesized. 合成了己二酸改性环氧丙烯酸酯颜料润湿分散剂;
- Epoxy acrylate (EA) resin is an important photosensitive resin, in which bisp henolic epoxide was most widely used in the field of UV curing coating. 环氧丙烯酸(EA)树脂在辐射固化领域中是一种重要的感光树脂,其中双酚A型环氧树脂的应用最为广泛。
- The photocuring process of epoxy acrylate resin was studied by differential photo-calorimetric(DPC) method in this paper. 采用光差扫描量热法考察了环氧丙烯酸酯的光固化动力学行为。
- Epoxy acrylates are the workhorses of the industry. 环氧丙烯酸酯是这个产业的主流。
- To compare with epoxy acrylate, the film of modified epoxy acrylate have been improved more markedly on flexibility, glossiness and adhesive force. 和未改性树脂相比,涂膜的柔韧性显著提高,光泽度增加,附着力变好。
- Research progress of UV-curable oligomers which were mainly epoxy acrylate resin and polyurethane acrylate were reviewed. 摘要综述了UV固化低聚物(主要是环氧丙烯酸酯和聚氨酯丙烯酸酯)的研究进展。
- The dynamic mechanical properties of IIR/resin curative blend system were investigated. 研究IIR/树脂硫化剂共混体系的动态力学性能。
- Tg and thermal stability of the blend system increased with increasing contents of PETG. 热失重分析结果表明:两组分相差较大时,随着PETG含量的增加,共混体系的热稳定性提高。
- The title UV curing coatings is prepared based on epoxy acrylate, reactive diluents and photoinitiator.The main raw materials and cured film are tested with TGA. 以环氧丙烯酸酯、活性稀释单体、光引发剂等为原料,制备UV固化涂层,对主要原料及固化后的涂层进行了热失质量分析。
- In non-isothermal crystallization, halftime (t1/2) of blend system was lower than the one of graft system. 非等温结晶过程中,共混体系半结晶时间t1/2小于共聚体系。
- Furthermore, the effect of BOZ on enhancing the intrinsic viscosity of PET/PEN blend system was studied for the first time. 首次以BOZ对PET/PEN的共混体系作了扩链增粘的研究。
- For PVC or PVC/MBS base material , the mechanical properties of blend system were not increased, but might be decreased. 而对于改性PVC和改性PVC/MBS基体,共混体系的力学性能没有提高,且有负面影响。
- The results showed that the shrinkage of system were improved obviously by adding modified epoxy acrylic ester,and the diluent had effect on shrinkage. 实验结果表明:改性环氧丙烯酸酯可以明显改善体系收缩率,稀释剂对收缩率有影响。
- The spinnability and the dyeing properties of the multicomponent blend system of the polypropylene modified with MMT was studied in detail. 对蒙脱土改性聚丙烯的多组分共混体系的可纺性及染色性作了比较。
- The UV curable coating of fiber ribbon was prepared by blending bisphenol A epoxy acrylate(EA) and polyurethane acrylate(PUA)and adding reactive diluent,photoinitiator and pigment. 采用双酚A环氧丙烯酸酯(EA)和聚氨酯丙烯酸酯(PUA)共混,加入活性稀释剂、光引发剂、颜料等制备了紫外光固化光纤涂料。
- The reslut showed that the addition of few parts of rigid organic did have tuonghening and reforcement effect on PVC/EVA blend system. 实验结果表明,添加少量的刚性有机粒子对PVC/EVA共混体系有较明显的增韧与增强作用。
- The result of performance test showed that the maleic anhydride and polyethylene glycol 400 monoester was the best to improve the viscosity of epoxy acrylate and the best mule ratio was 0.1. 实验结果表明:马来酸聚乙二醇400单酯改善体系黏度的效果最好且与环氧树脂的当量比为0.;1:1时最佳;
- Appl yin g VS/MA copolymer with epoxy acrylate and pentaerythritol triacrylate as a photo sensitive resin, it can give a clear image after UV expose and developing with alkaline water. 应用乙烯基螺环原酯/马来酸酐共聚物与改性环氧 丙烯酸酯和季戊四醇三丙烯酸酯组成感光树脂,经曝光和碱水显影加工可获得清晰的图像。