您要查找的是不是：
- Merz-Colwell extrusion rheometer 梅尔茨-科威尔挤压式流变仪
- Keywords ceramic paste;extrusion;extrusion rheometer;extrusion parameters; 陶瓷坯料;挤压成型;挤出流变计;流变参数;
- extrusion rheometer 挤出式流变仪
- press-flow extrusion rheometer 压流型挤出流变仪
- The end pressure loss of LLDPE melt in short die extrusion and factors affecting the pressure loss were investigated by using a capillary rheometer. 应用毛细管流变仪,考察了线性低密度聚乙烯(LLDPE)熔体于短口型挤出流动中的末端压力损失及其影响因素。
- The flow behaviour of two polystyrene melts, styron 498 and styron 492J, in extrusion were investigated by using a capillary rheometer. 应用毛细管流变仪,考察了两种聚苯乙烯-Styron498(PS498)和Styron492J(PS492J)熔体挤出过程中的流动行为及其影响因素。
- New methods of preparing novel polymer and modifying polymer are grafting of polymer by reactive extrusion and in the Haake torque rheometer. 综述了利用哈克转矩流变仪及采用反应挤出法制备接枝聚合物的特点及接枝体系的选择。
- The springboard is made of an aluminium extrusion. 跳板是铝制的挤压板。
- The rheological properties of PLA chip were measured by extrusion capillary rheometer at different temperatures and shear rates. 摘要以聚乳酸切片为原料，在不同温度下，利用毛细管流变仪测试其流变性能。
- Abstract:The flow behaviour of PP/EPDM/glass bead (GB) composite during extrusion at 463 K was investigated with a constant rate capillary rheometer. 摘要：采用恒速率型毛细管流变仪，考察463 K下PP/EPDM/玻璃微珠复合材料的挤出流动性。
- Disc extrusion or extrude in 19 cases. 合并椎间盘碎裂或单纯椎间盘突出19例;
- Dynamic extrusion experiments for polymer melts were done on the invariable speed type capillary dynamic rheometer (ISTCDR) made by the author. 在自行设计的恒速型毛细管动态流变装置上,对聚合物熔体进行动态挤出实验。
- Suitable for extrusion of thick-wall parts. 适用于厚壁零件的挤压。
- WUXI SUPERHUMAN GEAR COLD EXTRUSION CO., LTD. 无锡市神力齿轮冷挤有限公司。
- Hot forging, rolling, extrusion, etc. 热锻、滚轧、热压等等。
- THIRD LAY: POLYETHENE EXTRUSION LATERAL APPLIED. 第三层聚乙烯应用（侧向挤压？）
- The high speed extrusion behaviors of several polyolefine melts were investigated by a double capillary rheometer of constant speed type. 阐述了抗静电剂的种类、作用机理和选用原则,以及抗静电剂在聚烯烃中的应用和国内最近的研究进展。
- The rheological properties of low density polyethylene (LDPE) were measured under conditions close to the practical extrusion process by means of a capillary rheometer. 应用毛细管流变仪测量了在接近实际挤出工艺条件下低密度聚乙烯熔体的流变性质;
- Extrusion punches must be coated to prevent galling. 为防止磨损拉伸冲头必须做镀层处理。
- The springboard is made out of an aluminum extrusion. 跳板是铝制的挤压板。
