您要查找的是不是：
- The forming process of passivation film possibly consists of four steps which are zinc dissolution, basic area appearance, gelatiniform film forming and converting to passivation film. 钝化膜的成膜过程可能包括镀锌层的溶解、碱性薄层的形成、胶状膜的形成和胶状膜转化成钝化膜4个步骤。
- Study on Structure of Montmorillonite in Film Forming Process of Compound Emulsion 复合乳液成膜过程中蒙脱土的结构研究
- film forming process 成膜过程
- The microbe was related closely with the forming process, and structure and clinging form of the film surface contaminant. 结果显示，丝状菌与膜表面污染物形成过程及结构、附著形式密切相关。
- Forming process and related parameters of the SMC were introduced. 给出了片状模压料SMC的成型工艺参数以及压塑成型过程。
- The performance of coatings not only relies on formulation and molecular structure of polymer binders, but also the film - forming process. 涂料的性能不仅取决于涂料的配方和其中聚合物的分子结构,而且与聚合物的成膜过程密切相关。
- And the film forming and their properties of latexes were also invesitgated. 考察了复合乳液的成膜性及胶膜性质。
- A thin film formed on the surface of the pulp. 纸浆表面结了一层膜。
- This paper introduced the sheet metal layered incremental forming process. 摘要本文介绍了金属板材分层渐进成形技术。
- The thin, dry film formed by such a mixture when applied to a surface. 已干油漆层用于表面时这种混合物薄而干的膜
- The reacting mechanism between silane and steel surface, the forming process of silane treating film and the linkage between silane and epoxy resin were studied. 摘要介绍了硅烷与钢之间的作用机理、钢表面硅烷处理层的形成过程以及硅烷处理层与环氧树脂涂层之间的结合。
- Graduate in Junior College or above, major in plastic forming process. 注塑成型工艺大专或以上学历。
- FEM simulation of sheet metal layered forming process has been introduced. 介绍了金属板料分层渐进成形过程有限元模拟。
- The systematology is one of theories on oil and gas pool forming process. 系统论是成藏作用研究的重要理论基础之一。
- EDX analyses showed the adsorbed film formed on the cast iron. X-射线能谱分析显示在铸铁的摩擦表面有一吸附层形成。
- Then the forming process and traits of financial canters are discussed. 具体分析了金融中心的形成途径和特点。
- Forming process of ventilated supercavity was recorded and analyzed. 详细分析了通气超空泡的生成和发展过程；
- The reason is that the bionically unsmoothed surface has better ability on lube storage and oil film forming. 其原因是在有润滑条件时，仿生非光滑结构具有较强的贮存润滑油及形成油膜的能力。
- The thin,dry film formed by such a mixture when applied to a surface. 已干油漆层用于表面时这种混合物薄而干的膜
- The phosphorated fluid mainly consists of film forming agent, promoter and additive. 磷化液主要由成膜剂、促进剂及添加剂组成。
