您要查找的是不是：
- This paper discusses a finite element model updating method based on sequence quadratic programming (SQP). 摘要提出了一种利用通用有限元程序和数学软件进行有限元模型修正的方法。
- Wu, J. R. and Li, Q. S., “Finite Element Model Updating for A High-rise Structure Based on Ambient Vibration Measurements” J. Engineering Structures 2004; 26:979-990. 戴志豪(2003)，次空间运算之系统建定与有限元素模型的修正，国立台湾大学工程科学及海洋工程学研究所博士论文，指导教授:洪振发。
- structural finite element model updating 结构有限元模型修正
- Finite Element Model Updating Using Radial Basis Function Neural Network 基于径向基神经网络的有限元模型修正研究
- Dynamic finite element model updating using meta-model and genetic algorithm 一种利用等效模型与遗传算法的动态有限元模型修正方法
- Dynamic Test and Finite Element Model Updating of Bridge Structures Based on Ambient Vibration 基于环境激励的桥梁结构动力测试及模型修正
- Dynamic Finite Element Model Updating And Its Application in Aerospace Structures 动态有限元模型修正技术及其在航空航天结构中的应用
- finite element model updating 有限元模型修正
- Its finite element model is established. 构造了其有限元模型。
- These problems are as follows:mode-shape projection,model reduction,parametrization and regularization,and Bayesian probability technique for updating finite element model. 这些问题里:模态形状的映射,模型降阶,参数化和正则化,以及有限元模型修正中的贝叶斯概率方
- A static finite element model of an air spring was given. 摘要文中建立了空气弹簧的静态有限元模型。
- In this paper, sensitivity analysis of parameter modification method is played in updating finite element model based on bridge loading test data, and the model is certificated firstly. 依据实桥荷载试验所得的力学特性参数，首先采用基于敏感性分析的参数修正法修正计算模型，并对该计算模型进行验证。
- The finite element model of opening gap tantalum thin-walled tube is setup. 为了控制钽薄壁管焊接成形的质量,进行钽薄壁管开口间隙场计算模型的研究。
- Primary study on the construction of the finite element model of tooth and post-core. 牙齿与桩核三维有限元建模的初步探讨。
- Study Design. In vivo study of a computed tomography (CT)-based nonlinear finite element model (FEM). 研究设计：基于CT的非线性有限元模型(FEM)的体内研究。
- The principles to construct finite element model for modal analysis of the cylinder block have been obtained. 通过研究，得出了建立内燃机机体的有限元模型的一些原则。
- This paper deals with the finite element model of DWX hydraulic prop in aid of Pro/MECHANICA. 本文用Pro/MECHANICA有限元分析软件,建立了柱塞悬浮式液压支柱的有限元模型。
- The finite element models simulating normal, pre- and post-PFO were created. 再者，可产生模拟正常、病患的股骨近端截骨术术前及术后情形的有限元素模型。
- The finite element model of a small punch test specimen of 1Cr0.5Mo steel is established. 基于小冲孔蠕变试验 ;建立 1Cr0 .;5Mo耐热钢小冲孔蠕变试样的有限元模型。
- The finite element model of the front m ember of one passenger car is created with its CATIA model. 利用轿车前梁的CATIA模型建立其有限元模型。
