您要查找的是不是：
- Squeeze casting is descrbed as having a combination of the virtues of gravity die casting and closed die forging. 挤压铸造被认为兼具有压力铸造和合模俦造的优点。
- Above result revealed that multidirectional closed die forging of spiral bevel gear was feasible. 揭示了使用复动闭式模锻模具成形小锥角螺旋伞齿轮的可行性。
- Based on the closed die forging process and the FEM simulation for the pole, the mould structure for precision alternator pole forging is designed. 在磁极的精密模锻生产工艺分析和有限元模拟基础上,设计了磁极精密模锻新工艺参数和新型的锻模结构。
- As the Close die forging hammer is working in atrocious condition, its maximum intense part-anvil block must bear frequent shock and overload. 摘要模锻锤由于其特别恶劣的工作条件，其上最大的受力零件-砧座，会受到频繁的冲击和过载。
- Tests and researches are conducted for microstructure,residual stress,dislocation density and hardening principle of starlike inner race formed by cold closed die forging method. 针对经闭塞冷锻成型的星形套的组织、残余应力、位错密度及硬化规律进行了试验研究。
- P.Skubisz, J.Sinczak, S.Bednarek, ”Forgeability of Mg-Al-Zn Magnesium Alloys in Hot and Warm Close Die Forging,” Journal of Materials Processing Technology, Vol.177, pp. 210-213, (2006). 何惠琳，“径向凸缘成形模具设计及相关参数影响之研究，”国立台湾科技大学机械制造组研究所博士论文，民国92年。
- Multidirectional Closed Die Forging Set of Spiral Bevel Gear 螺旋伞齿轮复动闭式模锻模具
- Keywords Closed die forging Die construction Diverter Forging die design; 闭式模锻;模具结构;分流器;锻模设计;
- Abstract： Using the feature technique,a set of flashless die forging CAPP system for gear blanks is developed. 摘 要： 运用特征技术，开发了一套齿轮坯的闭式模锻CAPP系统。
- Using the feature technique,a set of flashless die forging CAPP system for gear blanks is developed. 运用特征技术,开发了一套齿轮坯的闭式模锻CAPP系统。
- It has elaborated the advantages replacing open -die forging with flashless die forging technology. 阐述了用闭式模锻工艺代替开式模锻的优点。
- Study on Microstructure Residual Stress and Performance of Starlike Inner Race Produced by Cold Closed Die Forging 闭塞冷锻星形套的组织、残余应力及性能研究
- Such systems can greatly increase the technical designing effeciency and quality of flashless die forging in gear blanks. 该系统能极大地提高齿轮坯的闭式模锻工艺设计的效率和质量。
- Keywords Spiral beval gear;Multidirectional closed die forging;Preformed blank;Die design; 关键词机械制造;复动闭式锻模;螺旋伞齿轮;模具设计;
- The central problem, appearing in the process of flashless die forging of cylindrical gear blanks, may be the fold in inner bore and the local unfilled zone. 圆柱齿轮坯的闭式模锻工艺中,可能出现的主要问题是内孔折纹和局部不充满。
- DESIGN AND ANALYSIS OF SMALL-SCALED COMPLICATED STRUCTURAL PARTS OF TITANIUM ALLOY SHAPED BY ISOTHERMAL PRECISION CLOSED DIE FORGING 钛合金小型复杂结构件闭式等温精锻工艺设计分析
- The research results were used in design of a punch in flashless die forging for the star-like inner race of constant-velocity universal joint in cars and the fracture problem of punch was solved. 将研究结果应用于轿车等速万向节星形套闭塞模锻凸模设计中，解决了闭塞模锻工艺中凸模断裂问题，对闭塞模锻凸模设计有一定的指导意义。
- mechanics of closed die forging 闭模锻造力学
- closed die forging of ring 环形件闭式模锻
- closed die forging 闭模锻造
