您要查找的是不是：
- The force used to break the bar is the flexural strength. 塑封料塑封后的小棒，用3点弯曲测试抗弯曲的强度。
- For flexural strength test of cement specimen and other nonmetallic material. 用作水泥或其它非金属脆性材料试块的抗折强度测定。
- The flexural strength of all FRC posts was tested with a 3-point bending test. 三点挠曲实验比较不同弯曲度的FRC弯钉与FRC直钉的挠曲强度和挠曲模量。
- The flexural strength was determined by using the 4-point bending technique. 本研究以四点弯曲的方式量测挠曲强度。
- The relationship between compressive strength (flexural strength) with ice temperature, stress and direction is analysed in the paper. 分析了海冰的压缩强度和弯曲强度与冰温、应力率和加载方向的关系。
- Flexural strength and elasticity decreased significantly with increasing wood content. 含木率之增加降低了抗弯强度及抗弯弹性率至为显著。
- Flexural strength, flexural modulus and impact strength of CF/BPR composites increase with increasing CF content. 随着破纤维含量的增加，CF/BPR复合材料弯曲强度、弯曲模量和冲击强度均逐渐增加；
- The material mechanical properties, such as flexural strength, are measured by three point bending techniques. 利用三点弯曲方法测定了材料的抗弯强度等力学性能。
- The modified straw powder treated with Titanate coupling agent could increase the flexural strength of PVC sheet. 经钛酸酯偶联剂处理的改性秸秆粉能增强PVC板材的弯曲强度。
- In the present paper the density of bodies beforeand after sintering as well as flexural strength were measured. 相应地对成型体的密度，弯曲强度及烧结体的密度和强度进行测量。
- With the rise of high silica glass fibers' content, the flexural strength and modulus of the composite increase. 随着高硅氧纤维含量的提高; 材料的弯曲强度及弯曲模量均明显提高.
- The flexural strength and impactstrength of non-continuous long fibres reinforced phenolics toughen... 非连续长纤维增强塑料的弯曲强度、冲击强度优于短纤维增强塑料。
- Both flexural strength and impact strength of FBZ/E laminate are more than 3 times FBZ laminate. FBZ/E层压板的弯曲强度和冲击强度都比FBZ层压板提高3倍多;
- Zirconia ceramics used in all-ceramic restoration of prosthodontics has shown favorable biocompatibility, chemical stability, flexural strength and color property. 摘要氧化锆陶瓷作为口腔全瓷修复材料，在生物相容性、化学稳定性、抗弯曲强度和色泽等方面具有优势。
- The bending experimental results show that the highest flexural strength of the joint at room temperature was acquired to be 13.6MPa. 弯曲实验结果表明;采用该工艺得到的接头最大弯曲强度为13.;6MPa。
- The experiments included compressive strength, flexural strength, shear strength of sand grouts, stability and fluidity of net grouts. 试验内容包括砂浆的单压、抗弯、抗剪强度试验以及净浆稳定性和流动度试验。
- Strong end restraint provided by heavy elements, such as footings, can improve the flexural strength of critical column sections. 摘要基础等构件提供的端部强约束能提高柱临界截面的抗弯承载力。
- The flexural strength of EB treated specimen increased while the flexural module and the short beam shear strength changed unobvious. 辐照后复合材料的弯曲强度得到明显提高，但弯曲模量和层间剪切强度基本不变。
- Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature. Part 1 : determination of flexural strength. 高技术陶瓷.;单片陶瓷
- Glass fiber is used to reinforce material for increasing toughness, flexural strength, and tensibility in unsaturated polymer modified concrete. 玻璃纤维则是作为强化材,以增加水泥浆体的韧性及抗弯、抗拉等机械性质。
