您要查找的是不是：
- With their low mass and short switching times, piezo actuators are far superior to the conventional solenoid valves used to actuate the injection needles in fuel injection valves. 由于压电致动器体积小、切换时间短，它们远胜于在喷射阀被用来驱动喷油针的传统螺线阀。
- fuel injecting valve 燃油喷射阀
- fuel injection valve 燃油喷射阀
- Disconnect all fuel injection harness connections. 断开所有的燃油喷射电线束接头。
- WUXI EUROPE ASIA DIESEL FUEL INJECTION CO., LTD. 无锡欧亚柴油喷射有限公司。
- Jiangsu Sihong Fuel Injection Equipment Co., Ltd. 江苏泗洪油嘴油泵有限公司。
- Check whether or not the fuel injection pump plunger and fuel outlet valve is worn or clogged, plunger spring and fuel outlet valve spring is broke. 喷油泵柱塞及出油阀是否磨损或卡死、柱塞弹簧及出油阀弹簧是否折断；
- ROAD VEHICLES. BASE MOUNTED IN-LINE FUEL INJECTION PUMPS. 道路车辆。平面底座直线固定喷油泵。
- A new method of fuel injection was developed during the war. 一种新的注油方法在战争期间发展起来。
- Woodward has a full range of fuel injection nozzles. 伍德沃德有一系列完整的燃油喷射喷嘴。
- This instrument uses an injection valve with a loop (chroma) or a trap (airmo). 在注入分析循环后测量卤素/在能阱浓缩后测量卤素。
- Opening Pressure of Fuel Injector: 15,000–15,8kPa (2175–2291 psi). 燃油喷射器打开压力： 15;000–15;8kPa (2175–2291 psi).
- The wastewater samples is transmitted by an air-operated aspirator to the liquid injection valve. 用气动吸引器将废水试样送入液体注射阀。
- Install fuel injector(s) into fuel rail assembly and install retaining clip(s). 将燃油喷射器安装在燃油轨道组合中，并安装固定夹。
- ROAD VEHICLES. END-MOUNTING FLANGES FOR FUEL INJECTION PUMPS. DIMENSIONS. 道路车辆。喷油泵用安装法兰。尺寸。
- Then FAQs were added for the fuel injected models (the GS, Dakar and CS). 然后又增加了常见的燃料注入模式（一般事务，达喀尔和CS）。
- It provices pulses of a set duration, so that the injector valve opens and closes, or pulses, very quickly. 喷油器提供脉冲宽度，使喷油器阀门打开和关闭。
- Injecting animals is all in a day's work for a vet. 给动物注射是兽医的日常工作。
- The design concept and principle of injector valve system of hypersonic wind tunnel controlled by the computer are introduced in this paper. 本文介绍了高超声速风洞引射器阀门系统采用计算机控制的设计思想和原理框图。
- variable orifice fuel injecting nozzle 变喷口喷嘴
