您要查找的是不是:
- This paper presents a predictive research on the performance of D.I.diesel engine from its fuel injection rate. 从直喷式柴油机喷油规律出发对其整机性能进行了预测研究。
- Abstract: This paper proposes a new method to predict heat release rate from fuel injection rate in swirl chamber diesel engines. 文摘:提出了由喷油规律预测涡流室柴油机总放热规律和主、副室放热规律的一种新方法。
- Based on the AVL fuel injection simulation software HYDSIM,this paper gives a simulation analysis on top clearance plunger pump. By changing fuel injection rate,the top clearance plunger can soften engine combustion, reduce NOx emission and noise. 利用AVL公司HYDSIM软件对顶隙式喷油泵柱塞进行分析,顶隙柱塞改变了喷油速率曲线,使发动机燃烧柔和,有利于降低NOx和燃烧噪声;
- fuel injection rate 喷油率
- Disconnect all fuel injection harness connections. 断开所有的燃油喷射电线束接头。
- WUXI EUROPE ASIA DIESEL FUEL INJECTION CO., LTD. 无锡欧亚柴油喷射有限公司。
- The txRate parameter is the injection rate. txRate参数就是注入速率。
- Jiangsu Sihong Fuel Injection Equipment Co., Ltd. 江苏泗洪油嘴油泵有限公司。
- Effect of polymer injection rate on EOR. 注聚合物速度对提高原油采收率的影响
- ROAD VEHICLES. BASE MOUNTED IN-LINE FUEL INJECTION PUMPS. 道路车辆。平面底座直线固定喷油泵。
- Results Injection rate had a significant effect on TTP of lung. 结果 注射速率对两肺组织至峰值时间有显著性影响。
- A new method of fuel injection was developed during the war. 一种新的注油方法在战争期间发展起来。
- Woodward has a full range of fuel injection nozzles. 伍德沃德有一系列完整的燃油喷射喷嘴。
- The scan cover, injection rate and reconstruction matrix were assured. 确定增强扫描范围、佳注射速率与重建矩阵。
- ROAD VEHICLES. END-MOUNTING FLANGES FOR FUEL INJECTION PUMPS. DIMENSIONS. 道路车辆。喷油泵用安装法兰。尺寸。
- Fuel delivery system can be divided into two categories, carburetor and fuel injection. 燃料供给系统可分为化油器和燃料喷射二大类。
- They varied both chamber pressure and mixture ratio, making use of a stepfunction change in the oxidizer injection rate. 他们通过用氧化剂喷射速率阶跃函数变化的方法来改变气室压力和混合比。
- The method can realize nondestructive testing for fuel injection law without disassemble. 该方法可实现对喷油规律的不解体检测。
- To meet the high coal injection rate it is necessary to modernize PCI technology. 为了适应高炉大量喷吹煤粉,必须对高炉喷煤工艺及设备进行改造。 方向是:煤场要增加储煤能力,实现自动配煤;
- Opening Pressure of Fuel Injector: 15,000–15,8kPa (2175–2291 psi). 燃油喷射器打开压力: 15;000–15;8kPa (2175–2291 psi).