该词条未找到_海词词典

您要查找的是不是：

gas lubricated journal bearing 气体径向轴承
Performance of Ferrofluid Lubricated Journal Bearing 均匀磁场中铁磁流体润滑的轴颈轴承
Test Investigation on Water- Lubricated Journal Bearing with Silicified Graphite Layer for the Pump- Motor in Nuclear Plant 核电主泵电机水润滑硅化石墨径向轴承试验研究
The design principles and the optimum range of the new aerodynamic foil journal bearing with elastic support and self-acting gas bearing cryogenic turboexpander were obtained. 归纳总结了弹性支承箔片动压气体径向轴承的性能特点和最优设计原则，并提出了全动压透平膨胀机的设计准则。
In addition to the new aerodynamic foil journal bearing with elastic support, the spiral groove thrust bearing was also applied to the self-acting gas bearing turboexpander in the air refrigerator. 并采用平面螺旋槽动压气体止推轴承，对空气制冷机用透平膨胀机进行了全动压气体轴承支承的研究。
How many radial (axial ) clearnance are there in this bush (journal bearing, thrust bearing)? 这个轴套(轴颈轴承、止推轴承)的径向(轴向)间隙是多少?
In this paper, Reynolds equation of fintely-wide journal bearing for Oldroydfluid is derived by perturbation methods. 采用摄动分析方法,推导出Oldroyd模型的非牛顿流体的雷诺方程。
The new aerodynamic foil journal bearing with elastic support was applied to the turboexpander successfully. 成功地将新型箔片动压气体轴承低温透平膨胀机应用在逆布雷顿循环制冷机上。
The film pressure,end leakage flow-rate and frictional coefficient of misaligned journal bearing were calculated. 计算了轴受载变形导致轴颈倾斜情况下,轴承的油膜压力、端泄流量和轴颈摩擦因数等。
externally pressurized gas journal bearing 静压气体轴颈轴承
Rao H V V L N,Biswas S, et al.Analytical approach to evaluate dynamic coefficients and transient analysis of a hydrodynamic journal bearing. 刘恒.;转子轴承系统稳定性分叉问题的研究:[博士学位论文]
Analytical calculation of pocket-step-bush gas lubricated thrust bearing 袋式阶梯瓦气体止推轴承的分析计算
To acquire photos of cavitation and pressure in film simultaneously,a test rig on journal bearing was rebuilt and designed. 对滑动轴承试验台进行了改造,使得油膜分布以及油膜压力同步采集成为可能。
The influence of the misalignment caused by a crankshaft deformation on the trajectory of the journal bearing center was studied. 研究了因变形而引起的曲轴倾斜对轴颈轴心轨迹的影响。
Secondary development was carried out by combining the methods of finite element analysis (FEA) about gas lubrication with the slide bearing analysis module of Marc. The static properties of aerostatic bearing were obtained. 利用通用有限元软件Marc中的滑动轴承模块,结合气体静压润滑问题的有限元理论分析方法,对该模块进行二次开发,求得气体静压轴承的静态特性,并通过实验加以验证。
Oil-lubricated journal bearing is an important class of bearing ,It have practical value to analyze it,it is selected as researching object in the thesis. 动压式滑动轴承是轴承中的一个重要类别，对其进行分析研究在实际中具有重要的意义。
In this paper, FEM(Finite Element method) with isoparametric ements is employed to solve the Reynolds equation descrbing the characteristic of journal bearing. 本文采用等参单元的有限单元法求解描述轴承动压特性的雷诺方程。
Abstract : According to 1st order slip velocity boundary, Reynolds equation for micro gas journal bearings was given with consideration of effective viscosity under rarefied gas condition. 摘要：基于1阶滑移速度边界，考虑到稀薄条件下气体的有效黏度，给出了气体径向微轴承润滑雷诺方程。
Based on lubrication analysis of journal bearing, the stress distribution of shaft was calculated by using film pressure that calculated as boundary condition of load. 在轴承润滑分析的基础上,将得到的轴承油膜压力作为载荷边界条件,计算了轴的应力分布。
Hydrodynamic lubrication characteristics of a journal bearing considering misalignment caused by shaft deformation were analyzed in shaft-bearing system. 分析了轴轴承系统中,当轴受载变形导致轴颈倾斜时,径向滑动轴承的流体动力润滑特性。