您要查找的是不是：
- Shang Qing,Zhang Jian,Zhou Lixing.Effects of gas temperature fluctuation on the devolatilization of pulverized coal particle[J].J Engineering Thermophysics,2005,26(6):1049-1052(in Chinese). [2]尚庆;张健;周力行.;气相温度脉动对煤粉颗粒挥发分释放的影响[J]
- characteristics of gas temperature fluctuation 气体温度脉动特性
- EFFECTS OF GAS TEMPERATURE FLUCTUATION ON THE DEVOLATILIZATION OF PULVERIZED COAL PARTICLE 气相温度脉动对煤粉颗粒挥发分释放的影响
- gas temperature fluctuation 气相温度脉动
- It relied on exhaust gas temperature (EGT). 就靠排气的温度，看到的都是单线和双线的氧传感器。
- We had already perceived how the temperature fluctuated. 我们已注意到温度的波动情形。
- The model accounts for the effects of turbulent fluctuation of gas temperature on the particle instantaneous temperature, devolatilization rate, and heterogeneous reaction rate. 该模型考虑到了气相温度的湍流脉动对颗粒瞬时温度、瞬时热解速率和瞬时多相反应速率的影响。
- The major factors is excess air and flue gas temperature. 影响注汽锅炉运行热效率的主要因素是排烟温度和空气系数,测算分析表明,大部分注汽锅炉二者均超标。
- The causes of temperature fluctuation in cryostat have been shown by analysing a typical temperature control system. 本文通过对典型的低温恒温控制方法的一般分析。
- A superconductor temperature sensor was developed to measure the tiny temperature fluctuation in superfluid helium. 论文在实验中设计了一个超导温度传感器来测量微小的温度变化。
- The temperature fluctuates from day to day. 温度天天在变化。
- The patient 's temperature fluctuates. 病人的体温起伏不定。
- The patient 's temperature fluctuates . 病人的体温起伏不定。
- The amplitude of wall temperature fluctuation is larger than that of fluid temperature oscillation. 流量的波动又引起了管壁温度和流体温度的周期性波动；
- The results show that when using ultrafast high pulse-rate laser ablates targets, the target temperature fluctuation can be effectively decreased. 结果表明，用超快脉冲激光制膜可以有效地减小烧蚀期间靶材温度的大幅度波动。
- A mathematical model was also conducted to simulate the temperature fluctuation under coolant flow fluctuation condition. 管壁蓄热对流体温度影响较大，造成流体温度波动曲线与壁温波动曲线存在较大相位差。
- However, for certain temperaturesensitive materials the inlet gas temperature must be lowered. 但是，对于某些温度敏感的材料，进入的气体温度必须降低。
- In this paper the COS process is simulated through FEM to understand the phenomena of no fusion and lug melt because of mold temperature fluctuation. 本课题通过有限元分析模拟铸焊过程,揭示了由于模温的变动导致的冷焊或过熔的规律。
- However, for certain temperature sensitive materials the inlet gas temperature must be lowered. 但是,对于某些温度敏感的材料,进入的气体温度必须降低。
- This paper ensures the math model of gas temperature of cement decomposing furnace exit by analyzing its character. 摘要通过对水泥分解炉的特性进行分析，确定了出口气体温度的数学模型。
