您要查找的是不是：
- gear ring and sensor 齿圈和传感器
- On the side opposite to the seal, the impulse ring and sensor body form an effective labyrinth seal. 在密封件对侧,脉冲和传感器主体组成了一个有效的迷宫式密封。
- In addition, the hardness of gear ring and addendum is insufficent, that should be considered as one of failure reasons. 除齿顶外，被测齿圈硬度不足也导致齿轮、齿圈在短期内失效。
- David produced a diamond ring and asked Dawn if they could name the day. 戴维拿出了一枚钻石戒指，问道恩他们是否已选定婚期。
- Based on the features of the big geared ring on rotary furnace, this paper expounds the assembly and correction of the two half geared ring and the erection and alignment of the cylinder. 文章根据回转窑大齿圈结构特点,阐述了回转窑大修中两个半齿圈组装、校正及与筒体的安装,找正方法。
- Heat Treatment Distortion of Heavy Carburizing Gear Ring and Its Control 大型渗碳齿轮圈热处理畸变与控制
- A jewel fell off her ring and she could find neither hide nor hair of it. 一颗宝石从她的戒指上脱落了，她四下找，却杳无踪迹。
- BATTERY TEMP SENSOR SIGNAL AND SENSOR GROUND CKTS FOR RESISTANCE. 电池温度感知器信号和感知器接地电路S的电阻。
- Spindle out - of - center with ring and lappet. 锭子偏心，与导纱钩板和钢领不在一条直线上。
- Load weight controller is composed of controller box and sensor. 称重控制仪由两部分组成,一部分为控制仪部分,一部分为称重传感器部分。
- First device includes vibrating tube, exciter and sensor. 一次仪表部分包括振动管、激振器和传感器等。
- Give Helen a ring and ask her to come over. 给海伦打电话,请她过来。
- Cause Analysis for the Failures of Internal Gear Ring and Approaches to Prolong the Service Life 内齿圈失效原因分析及提高寿命的途径
- It represents the green ring and gymnastic sports. 他是五环中的黄环，代表田径项目。
- The washer reservoir, filler cap, and sensor are each available for service. 清洗器存储箱、填注口盖和感知器都可以维修。
- The telephone rang and interrupted my train of thought. 电话铃响了，打断了我的思路。
- Mrs. Wright bought a new gold ring and charged it to her fater. 怀特夫人买了一只新的金戒指，让记在她父亲的账上。
- Seryozhka takes the ring and covers the hole in the ice with it. 谢辽日卡拿过木环来，把它盖在冰窟窿上。
- Mr. Shaw made his fortune in the ring and on Wall Street. 萧先生在拳击以及华尔街投资中发财致富。
- Wheel shaft, wheel rim, gear, gear ring, con-rod, crankshaft, steering knuckle, steering arm, cam flange, spindle etc. 轮轴、轮毂、齿轮、齿圈、连杆、曲轴、转向节、转向节臂、垂臂；突缘、十字轴等异形件；轴类零件等锻件及主、被动齿轮成品。
