您要查找的是不是：
- gingiva surface texture 牙龈表面结构
- The surface texture produced by such a treatment or coating. 涂饰后的表面通过最后这道工序制造的表面纹理
- Lay - The main direction of surface texture on a wafer. 层-晶圆片表面结构的主要方向。
- To give(wood, for example) a desired or particular surface texture. 抛光给（例如木材）期望的或特殊的表面纹理
- Finally,the trends in surface texture analysis are suggested. 最后指出了表面特征分析的发展趋势。
- To give (wood, for example) a desired or particular surface texture. 抛光:给(例如木材)期望的或特殊的表面纹理。
- This paper has gathered massive wood surface texture picture, and pretreated. 本文通过采集大量的木材表面纹理图像，并经过了预处理。
- Complexity is related to surface irregularities, surface texture, fuzziness, and weave. 至于复杂性与表面的不规则性，表面结构，毛羽程度和织造加工有关。
- Lesson highlight: In this watercolor demonstration, you will learn about creating surface texture techniques. 在这水彩演示,您将得知创建表面纹理技术。
- Surface Texture - Variations found on the real surface of the wafer that deviate from the reference surface. 表面纹理-晶圆片实际面与参考面的差异情况。
- KrinsleyDandDonahueJ. Atlas of Quarts Sand Surface Texture[M]. New York:cambridge University Press, 1973.91. 谢又予.;中国石英砂表面结构特征图谱[M]
- Most of the stones of Stonehenge stand in incomplete formations for a missions of circles. They differ in height, weight and surface texture. 史前巨石柱的大多数石头组成不完整的圆圈,它们在高度,重量及表面特征方面有很大差异。
- Based on the image quilting method proposed by Efros et al., present and compare five methods for 3D surface texture synthesis. 在基于图像缝合的二维纹理合成方法基础上，提出并比较了五种三维表面纹理合成方法。
- The chemical etching method wa applied to form surface texture of multicrystalline silicon in order to reduce the reflectance of the surface. 为了降低光在多晶硅表面的反射,采用化学腐蚀法在其表面制备了绒面。
- On the basis of Markov Random Field(MRF) theory, Markov Random Field texture model was presented to analyse workpiece surface texture images. 基于马尔可夫随机场理论,建立了工件表面纹理图像的马尔可夫随机场纹理模型,并对工件表面纹理图像的特点进行了分析。
- Dental implant has been developed in different morphology and surface texture to replace the missing tooth in recent years. 摘要最近几年来，牙科植体研发出不同的型态与表面结构来取代欠缺的自然牙。
- Their own writing using the VC + DX9 to achieve 3D cube cube rotation and surface texture to achieve all the source code. 自己用VC+DX9写的实现3D立方体旋转与立方体各个表面纹理实现的源代码。
- The author proposes MRF through analyzing the workpiece surface texture after lathing and sets up the abrasion loss idetification of it with parameter. 针对车削后的工件表面纹理图像进行了纹理分析,建立了高斯马尔可夫随机场模型,并采用特征参数的相对距离实现了刀具磨损量的识别。
- The expected surface texture is obtained by properly setting moving distance of tool,the surface roughness is reduced,better lubricating ef... 控制回转偏心和刀刃相位差,既可以降低加工表面的粗糙度,又可以提高表面的润滑效果和视觉效果。
- Gibbs-MRF model was established in terms of the feature of wood surface texture, and the parameter estimation for Gibbs-MRF model was studied. 详细阐述了吉布斯-马尔可夫随机场模型的基本原理,并针对板材表面纹理特征建立吉布斯-马尔可夫随机场模型。
