您要查找的是不是:
- glass ceramic composite 微晶玻璃复合材料
- Baotou Jingniu Glass Ceramic Co., Ltd. 包头晶牛微晶股份有限公司。
- Beijing Tianxing Ceramic Composite Material Co., Ltd. 北京天兴陶瓷复合材料有限公司。
- Objective:To study on the mechanical properties and microstructure of alumina ceramic and glass infiltrated alumina ceramic composite of VITA In-Ceram ALUMINA,to provide guidance for further research and improvement on this kind of material. 目的:研究VITA In-Ceram ALUMINA氧化铝基体及渗透复合体的力学性能及显微结构,为该类材料的进一步研究及改性提供指导。
- Methods An artificial bone of phosphate glass ceramic was made to be filled perfectly into gap of the palatoschisis. 方法制备具有生物活性的磷酸盐微晶玻璃骨替代材料;
- Brazing bilayer ceramic composite fabricated by anthors with steel in the air have been investigated. 用自研制双层陶瓷复合材料与钢进行了大气中钎焊连接。
- Objective:To evaluate biological safety of new type hea t-pressed glass ceramic material. 目的:评估新型热压铸入型玻璃陶瓷材料的生物安全性。
- Diopside-based glass ceramic was made with steel slag and fly ash by sintering process. 以钢渣和粉煤灰为主要原料,采用烧结工艺,制得以透辉石为主晶相的微晶玻璃;
- Finally, several new ceramic composite materials have been briefly introduced, such as ceramic-metal composite materials, coating materials, fibre strengthening materials, erc. 并简单介绍了几种新的陶瓷材料,如陶瓷复合材料、涂层材科和纤维强化材料等。
- In this paper,the static fatigue properties of a fluoromicas containing machinable glass ceramic was investigated. 本文对一种典型可切削玻璃陶瓷的静疲劳行为进行了研究,研究了材料在空气、水、煤油中疲劳断裂。
- In view of cost, practicability and maneuverability, the special sintering diamond trepanning drill was developed for drilling ceramic composite components originally. 根据复合构件加工中的各种缺陷,分析了采用预压应力钻削对改善表面加工质量的重要性。
- The results show that, Main crystallization phase of glass ceramic was hedenbergite, and the minor crystallization phases were augite and hypersthene. 结果表明:矿渣微晶玻璃的主析晶相为钙铁辉石,次晶相为普通辉石和紫苏辉石;
- The results showed: 1. Osseointegration could bef ormed on the interface after the bioactive glass ceramic was implanted in three months. 结果认为:(1)生物活性玻璃陶瓷种植三个月后,界面可形成骨性结合。
- The relative density of ALT ceramic composite is much higher than that of pure hot pressed LaTaO3, which indicates that the addition of Al2O3 acts sintering aids. ALT陶瓷复合材料的相对密度比烧结纯LiTaO_3陶瓷的高得多,表明Al_2O_3起到烧结助剂的作用。
- It is concluded that after brazing bilayer ceramic composite with steel the three interfaces of the form multiplayer composite structure have been jointed w... 结果显示,双层陶瓷复合材料与钢钎焊连接后的多层复合结构接头的三个界面均达到较好的结合。
- ANUSAVICE K J, HOJJATIE B, HU S. Tensile stress in poste rior glass ceramic crown: effect of flaw and cement voids[J]. Dent Res, 1991 , 70: 434. 万红;杜传诗;吴德全.;粘固剂对烤瓷熔附金属底层冠就位的影响[J]
- For high antibullet performance, light weight and low cost, the ceramic composite armor is widely applied in the bodywork and casemate structures of tanks and armored vehicles. 陶瓷复合装甲以其优异的防弹性能、较轻的质量和相对便宜的价格成为新型的防弹装甲材料,应用于坦克装甲车辆以及其它军用车辆的车体、炮塔中。
- The paper postulated various possible toughening mechanisms existing in ceramic composite,while discussed the factors that in fluenced the toughening effects of these mechanisms. 本文论述了复相陶瓷中可能存在的各种增韧机制,并就影响这些机制发挥作用的各种因素作了简要介绍。
- Our products are suitable for precise printing of circuit panel、textile、plastic、glass、ceramic and scutcheon to satisfy different requirements from different customers. 专业生产高张力、低延伸聚酯丝网,适用于线路板、纺织、塑胶、玻璃、陶瓷、标牌等高精度印刷,可以满足广大用户的需求。
- Fabrication of Ceramic Composites by Infiltration: Search-in-Print Report. 用渗透方法制造陶瓷复合材料。