您要查找的是不是：
- governor adjusting screw 调节器调整螺钉
- governor adjusting screw cap 调速器调整螺钉帽
- The high step moves from under the adjusting screw. 使高点从调节螺钉下移动。
- The adjusting screw rests on the high step of the cam. 调节螺钉落在凸轮高点上。
- To Readjust- Loosen lock nut on the adjusting screw. 重新调节：松开调节螺丝上的锁定螺母。
- To Readjust - Loosen lock nut on the adjusting screw. 重新调节：松开调节螺丝上的锁定螺母。
- Remove compression from spring by turning adjusting screw (1) counterclockwise. 通过反时针方向旋转调节螺丝(1)从弹簧上拆卸压缩件。
- Heavy duty adjusting screw. Adjusting screw is both slotted and knurled. 重型调节螺丝。调节螺丝既有槽也有花纹边。
- Remove adjuster lever, adjuster screw and spring. 拆卸调整器杆，调整器螺丝和弹簧。
- J. Vertical Shaft Fine Adjustment Screw. 垂直杆微调螺丝.
- To replace seat/ stem module shut off supply, loosen locknut and back off adjusting screw. 要更换阀座/杆模块，先关闭供应管道，松开锁紧螺母，退出调节螺丝。
- Loosen the adjustment screw, and adjust the length of the link rod. 请拧松调整螺丝，拔出或插入连接杆进行调整。
- To replace seat/stem module shut off supply, loosen locknut and back off adjusting screw. 要更换阀座/阀杆模块，先关闭供应管道，松开锁紧螺母，退出调节螺丝。
- To clean or replace parts; shut off supply, loosen lock-nut and back off adjusting screw. 如果要清洗或更换部件，关闭供应管道，松开锁紧螺母，退出调节螺丝。
- Turn adjusting screw (1) clockwise to increase the delivery pressure, counterclockwise to lower it. 顺时针方向旋转调节螺丝(1)以增加输出压力，反时针方向旋转降低输出压力。
- Tighten adjustment screw to 3 N·m (30 in-lbs) torque. 拧紧调整螺丝到3 N·m (30 in-lbs)扭力。
- Lubricate adjuster screw threads and pivot with spray lube. 使用喷雾润滑油润滑调整器螺丝螺纹和枢轴。
- Two adjusting screws harmonise the guns with the sight. 有两个调节钮来校准武器和瞄准具。
- Firmly screw can on adapter, and turn the flow adjustment screw. 将料罐倒置与喷枪连接，旋转打开流量阀，调节流量。
- Throngh improving ram adjusting screw structure,impel it staunch and stand economic benefits raises notable. 通过对滑枕调整丝杠结构的改进,使之坚固耐用,经济效益得到明显提高。
