您要查找的是不是：
- Analysis of Effective Length of Gas Radiant Heat Transfer in Furnace 炉内烟气辐射换热有效长度分析
- heat transfer in furnace 炉内传热
- Predicting Three-Dimension Radiative Heat Transfer in Furnaces Using Revised Discrete Ordinate Method 用改进的离散坐标法计算炉内三维辐射传热
- HEAT TRANSFER IN DC ELECTRIC ARC FURNACE 直流电弧炉的传热
- heat transfer computation in furnace 炉膛传热计算
- Periodical convective boiling heat transfer in a time scale of milliseconds was found. 发现了周期在毫秒级的微时间尺度的周期性沸腾传热。
- Convection is the principal agent of heat transfer in the atmosphere and oceans. 对流是大气和海洋中热传输的主要方式。
- Numerical simulation of solidification and heat transfer in the mold for the bloom caster in Baotou Iron and Steel Co. 包钢大方坯连铸机结晶器凝固传热的数值模拟。
- Heat transfer in a gas or liquid by the circulation of currents from one region to another. 气体或液体中通过从一层到另一层的气流(或水流)循环进行的热传递.
- Methods of enhancing the heat transfer in heat exchanger about the shell and tube sides are introduced and commented. 介绍了管壳式换热器中管程、壳程的强化传热研究以及国内外推出的各种新型换热器的有关情况。
- Goering D J,Instanes A,Kundsen S:Convective Heat Transfer in Railway Embankment Ballast,Rotterdam,A.A.Balkema,2000. 李南生孙焕纯等:渠系基础冻结过程水热耦合问题数值分析;水利学报;1997(3).
- Effects of axial heat conduction in the wall on convective heat transfer in microtube have been studied analytically. 本文通过数值解析的方法研究了考虑壁面轴向导热时微细管内的对流换热。
- To accurately describe the fuel combustion and radiative heat transfer processes in furnaces is very crucial in comprehensive numerical simulation of ethylene pyrolyzer. 在乙烯裂解炉综合模拟研究中,准确地描述炉膛内燃料燃烧和辐射传热过程极其重要。
- A numerical study has been carried out on flow and heat transfer in the dry slag removal system (DSRS). 本文对锅炉干排渣机内的空气流动和传热进行了数值模拟,并将数值结果与实验数据进行了比较。
- Abstract: Abstract According to the testing results in the shaft furnace, the problems of pellets roasting and heat transferring in the furnace caused by using BF gas were analyzed,and some countermeasures for reformation were proposed. 文摘:根据球团竖炉工业测试结果,从焙烧制度和热工制度等方面分析了用高炉煤气作燃料的竖炉存在的问题,提出了球团竖炉强化焙烧的方向。
- Presented in this paper is a discussion on the models of bed to wall heat transfer in circulating fluidized bed (CFB). 对循环流化床传热的数学模型进行了分类和总结。
- Formulas caculating the time and area for heat transfer in batch pot were decuced. 推导出间歇釜热交换所需时间及传热面积的计算公式。
- In the last two area, heat transfer in narrow annuli is better than that in normal circular tubes. 在层流充分发展区和紊流区，窄环隙的对流换热特性要好于普通圆管。
- The periodicity of the flow and heat transfer in a corrugated channel is numerically investigated. 本文对锯齿型通道内流动与换热的周期性进行了数值模拟。
- A separated model is developed for the recirculating flow and heat transfer in a kettle reboiler tube bundle. 提出了釜式再沸器管束中循环流动换热的分相预报新模型,考虑了管束下部的过冷沸腾及循环液体的侧面引入。
