您要查找的是不是：
- heating tin bath 锡槽加热
- Abstract Based on the practice of float glass production,proposing and carrying out the transformation of tin bath water pocket. 摘要在浮法玻璃生产实践的基础上，提出并实施了对锡槽中温区水包的改造；
- In the whole float processes, the tin penetration profiles showed a tin hump, but the tin hump disappeared at the temperature at outlet of tin bath. 在浮法成型的过程中，渗锡的分布曲线上会出现卫星峰，但是最终在出锡槽的温度下渗锡曲线是单调递减的。
- Introduction Lift-out roll contacts with the glass ribbon immediately after being taken out from the tin bath to support and transfer the glass ribbon to the annealing lehr. 在浮法玻璃生产线上的提升辊、输送辊与通过锡浴的玻璃板接触，其辊面附着熔融锡。
- How to Prolong the Useful Life of Electrit Heating Wires in Tin Bath 如何延长锡槽电热丝的使用寿命
- Access obturator of tin bath top roller 锡槽拉边机入口密封装置
- Laying the Tin Bath Bottom Bricks 锡槽槽底砖的安装
- CHANGE OF TIN BATH SLUICE ON CONTINUOUS PRODUCTION 不停产更换锡槽出口闸板
- Studies on Recirculation of Molten Tin at the Exit End of Tin Bath 锡槽窄段锡液回流情况的研究
- ANALYSE ON DEFECT CAUSED BY WATER COOLER IN TIN BATH 锡槽水包引起的玻璃缺陷
- NUMERICAL MODELING OF TIN PENETRATION IN FLOAT GLASS IN A TIN BATH 浮法玻璃渗锡过程的数值模拟
- Heat sometimes causes a prickly rash on the skin. 热有时使皮肤上生剌痛的疹子。
- Temperature and Fluid Fields of Protective Gas in Vitreous Tin Bath 玻璃锡槽中保护性气体温度场和流场分析
- This is a highly efficient new heating system. 这是个高效的新取暖系统。
- DELIBERATION AND SETTING OF SOME PARAMETERS IN TIN BATH DESIGN 锡槽设计中几项参数的探讨与确定
- The system works on the principle that heat rises. 该项装置是按照热力上升的原理运转的。
- The heat had blistered the paint of the building. 酷热使建筑物上的油漆起了浮泡。
- The boil reason of tin bath bottom and preventive remove measure 锡槽槽底冒泡原因及预防消除措施
- It is this molecular motion that we call heat. 就是这种分子运动我们称之为热。
- Heat may travel in the same manner as light does. 热可以与光同样的方式传播。
